Want this question answered?
.2mm for intake and .3mm exhaust. or .008in and .012in when the motor is warm. not sure for cold motor.
0.031" = 0.8mm
Yes, it is an interference motor. The valve could contact the pistons if it was out of time.
4.5 ots with new oil filter about 5 and a half.
To set the timing on a Toyota 22R engine find the distributor. The engine will have marks at which the distributor can be set. The OEM setting for a 22R engine is 5 degrees.
.0010 - .0022 in or .025 - .055 mm max limit is .0031 in or .08 mm
yes you can you can use a junk yard version or you can go to new at ackits.com they have complete kits
a 22re is a radiator ignition and a 22r is just the radiator.
According to my 1991 owner's manual the gap is 0.031in or 0.8mm for a 22R-E engine.
Yes. In most models, if not all, the 22r came stock in them.
The 1984 Toyota 22R engine diagram can be obtained from most Toyota dealerships. The engine diagram can also be found at most auto-parts stores.
I own a 1986 Toyota pick up with a 4 cyl. 22R engine, and the fuel pump is located at the top left hand corner of the engine block ( looking at the engine from the front of the truck ).