yes you can you can use a junk yard version or you can go to new at ackits.com they have complete kits
Open the OIL FILLER cap--on the top of the engine- and add oil.
Yes, you can add a driver after pickup.
Check your engine. Check your fluid levels and add if needed.
Open the OIL FILLER cap--on the top of the engine- and add oil.
You add automatic transmission fluid to a 1989 V6 3.0 Toyota pickup truck through the filler tube in the engine compartment. This is also used to check the fluid level.
To add coolant to and 1985 Mercedes 380se find the reservoir located in the engine bay next to the radiator. Make sure to use the proper mixture of coolant to water ratio and pour until the appropriate level. Overfilling can lead to sprouting a leak while the engine is running.
add it to the oil.
The dip stick is located on the passenger side of the engine and to the rear of the engine. You also add fluid to this same tube if it is low. Check fluid car in park and running. Do not overfill so add a little at a time.
lawlz dude heres some rely good armer ok ? add me though m user is yyyyy141 ::pickup 4753 1 ::pickup 4755 1 ::pickup 4757 1 ::pickup 4759 1
To add Freon to a 1982 Toyota pickup, locate the low-pressure service port on the air conditioning system. This port is typically found on the larger diameter aluminum line that runs from the compressor to the evaporator. Remove the cap from the port, attach the refrigerant recharge hose, and follow the instructions on the refrigerant can to add Freon. Always ensure the engine is running and the A/C is set to the maximum cool setting while adding Freon.
Where do I add power steering fluid at for a 84 Park Avenue
Add it to the low presser side. It will be located on the evaporator on the fire wall on the passenger side of vehicle.