0
outdoorpowerinfo.com/engine.../kohler_valve_clearances.asp - Cached - Similar
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where is the intake valve on a mercury 1993 tracer?
In the cylinder head (top part of motor under valve cover).
How To Replace Valve seal On 2000 metro?
The head, or top part of the motor, must be removed to replace valve seals. After the head is removed take it to a machine shop and they will mill the head to make sure it is flat and also grind down the valves and replace the valve seals.
Where is the PCV valve located on a 2001 Chevy S-10 pickup?
If the engine in question is the 4.3l Vortec motor, the pcv valve is located on the driver's side valve cover, near the center. If it is the 2.2l motor, it is also located on the main valve cover, near the front of the cylinder head.
What is a burnt valve in a motor of a car?
a burnt valve looks like a wide crack in a valves' head. when a motor runs too lean, the cylinders heat up too much, causing the head of the valve to heat up faster than it can dissipate the heat, causing the valves' head to crack. once the valves' head starts cracking or melting away, you lose compression in that cylinder, and the engin will vibrate and it may not idle at all.
Does oil go to the heads in a 400 Pontiac motor?
Yes, it flows through the head to lubricate the valve train.
In most engines head of the intake valve is?
the intake valve head is larger than the exhaust valve head
Are Ford motor x and Ford motor e are same?
" X " is the 4.0 liter over head valve ( OHV ) V6 engine and " E " is the 4.0 liter single over head cam ( SOHC ) V6 engine
What is the torque setting for the Exhuast manifold on a 5.9 liter Cummins 24 valve diesel engine?
manifold to head bolts 32 ftlbs
What is the purpose of a valve spring in a petrol engine?
The valve spring is the spring that closes the valve in the engine head after the cam lobe or rocker opens it . If the valve didn't close, many things would happen , the main one being the motor would not fire .
Will the motor from a 99 Saturn fit a 98 Saturn?
It should. Look at the EGR valve; it's on the drivers side of the head. If the EGR valve is the same, everything else should be easy to exchange.
How do you check piston to valve clearance on a 350 sbc?
use a piece of modeling clay,( you can get any wal-mart craft section). place on top of the intake valve relief . place the head on the motor with a few bolts and with a week spring and your valve in place, compress the valve and measure the clearance with a dial indicator and this should tell you thickness of the head gasket you need.
What is the cylinder head torque settings of the opel astra 1600 16 valve ecotec motor?
torque specs in Nm and tightening esquence
