0
I did them with a 1,000 volt megger .
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Which was the first hydroelectric dam?
Depending on who you believe, the first hydroelectric generator was either at Niagara Falls in 1880 or at Appleton, Wisconsin in 1882. However, it is unclear whether either of these had a dam - they may have been simple waterwheels.
Explain the Information Processing Cycle of a computer?
= What is information processing cycle? = In: Computer Terminology [Edit categories][Edit]Information processing cycle of computer can be well described by the following points: (1) input, (2) processing, (3) output and (4) storage # Input-entering data into the computer. # Processing-performing operations on the data. # Output-presenting the results. # Storage-saving data, programs, or output for future use.1. INPUTThe collection of raw data from the outside world so it can be put into an information system. Putting the acquired data into the information system. # Examples: The payroll clerk collects workers' timecards so she knows how many hours each person worked that week and types the hours from the timecards into a spreadsheet # Conducting a survey of customer's opinions and then scanning the survey cards with a card reader. # Collecting jokes for a joke book and typing jokes into a word processor. # Using a form on a website to collect visitors' opinionsTypical input devices: Keyboards, mice, flatbed scanners, bar code readers, joysticks, digital data tablets (for graphic drawing), electronic cash registers2. PROCESSING CPU Processor - Central ProcessingUnit A central processing unit (CPU), or sometimes simply processor, is the key component in a digital computer capable of executing a program. It interprets computer program instructions and processes data. CPUs provide the fundamental digital computer trait of programmability, and are one of the necessary components found in computers of any era, along with memory and input/output facilities. A CPU that is manufactured as a single integrated circuit is usually known as a microprocessor. Beginning in the mid-1970s, microprocessors of ever-increasing complexity and power gradually supplanted other designs, and today the term "CPU" is usually applied to some type of microprocessor. Microprocessor (CPU)Integrated circuit, also called a chip. The Brain of the computerComposed of: ALU: Arithmetic Logic Unit: Processor Controller High speed calculatorIntel is the most popular chipCategorized by model numbersHigher model number=newer/faster chipSpeed of CPU is determined by clock speedHigher the clock speed, faster the computerSpeed is measured in megahertz (MHz) Megahertz: Clock Speed of the processor (100 MHz = 100 million cycles/second). Memory or RAM Next most critical element of a processing hardware is RAM, often referred to as "primary storage" or "main memory". Random Access Memory (RAM) receives and temporarily stores data and program instructions from the CPU This data bank communicates with the CPU, constantly exchanging information and constantly changing as long as the computer is onRAM is an active, electronic state. When the power is on, RAM retains data. When the computer is turned off, all data in RAM is erased unless you have saved it to some mass storage device. Each time the computer boots, the computer goes through it's startup routine and lastly loads operating system instructions into RAMRandom Access Memory (RAM) is the workhorse behind the performance of your computer. Working as a foot soldier for your processor, RAM temporarily stores information from your operating system, applications, and data in current use. This gives your processor easy access to the critical information that makes your programs run. The amount of RAM you have determines how many programs can be executed at one time and how much data can be readily available to a program. It also determines how quickly your applications perform and how many applications you can easily toggle between at one time. Simply put, the more RAM you have, the more programs you can run smoothly and simultaneously. To determine how much RAM you need, factor in the demands of the applications you want to run simultaneously as well as the operating system (512 MB of RAM is recommended by Microsoft as minimum for operation of Windows) Then keep in mind that you'll inevitably add new applications and create new files, and add accordingly. RAM: (Random Access Memory): (Click here to read "How Stuff Works - RAM") Types of RAM * DRAM (Dynamic RAM) This is the most common type of computer memory. DRAM needs refreshing and is refreshed hundreds of times each second in order to retain data. During recharging it cannot be accessed by the CPS * SRAM (Static RAM) SRAM is approximately 5 times faster (and twice as expensive, as DRAM). It does not have to be constantly refreshed. Because of its lower cost and smaller size, DRAM is preferred for the main memory, while SRAM is used primarily for cache memory. * SDRAM (synchronous dynamic RAM) is the standard memory offering in the PC industry and is faster than DRAM because it's synchronized to the system clock. . It is designed for mainstream home and business applications, email, and basic audio and video streaming. It provides single-channel memory and is available on our mainstream and value desktop system. * DDR SDRAM (double data rate synchronous dynamic RAM) takes all the features of ordinary SDRAM and increases the frequency bandwidth to improve system performance and speed. * RDRAM (Rambus dynamic RAM) is able to load a new stream of data before the previous stream has completed, resulting in faster access speeds. The RDRAM memory features dual-channel processing which doubles data throughput to further enhance performance. This type of memory is optimized for high-end multimedia tasks involving video and audio. Dual Channel RDRAM is shipped on our performance desktop systems powered by Pentium 4 processors * VRAM: Memory designed for storing the image to be displayed. * CACHE RAM is a small block of high-speed memory located between the Processor and main memory and is used to store frequently requested data and instructions. When the processor requests data, it will check in the cache firstUnderstanding the relationship between CPU and RAM The hierarchical arrangement of memory storage in current computer architectures is called the memory hierarchy. It is designed to take advantage of memory locality in computer programs. Each level of the hierarchy is of higher speed and lower latency, and is of smaller size, than lower levels. The memory hierarchy in most computers is as follows: * Processor registers - fastest possible access (usually 1 CPU cycle), only hundreds of bytes in size * Level 1 (L1) cache - often accessed in just a few cycles, usually tens of kilobytes * Level 2 (L2) cache - higher latency than L1 by 2× to 10×, often 512 KiB or more * Level 3 (L3) cache - higher latency than L2, often several MB * Main memory (DRAM) - may take hundreds of cycles, but can be multiple gigabytes. Access times may not be uniform.3. Output In information processing, output is the process of transmitting the processing information Essentially, output is the presentation of any data exiting a computer system. This could be in the form of printed paper, audio, video. In the medical industry this might include CT scans or x-rays. Typically in computing, data is entered through various forms (input) into a computer, the data is often manipulated, and then information is presented to a human (output). Typical output devices: Monitors* Pixels: Images are created with dots of lights called picture elements, or pixels. More pixels = higher resolution. Resolution is the maximum number of pixels the monitor can display * Basic VGA is a pixel grid 640 X 480 * Super VGA is 1,024 X 768 * A video card, (also referred to as a graphics accelerator card, display adapter, graphics card, and numerous other terms), is an item of personal computerhardware whose function is to generate and output images to a display. Printers * Laser - laser beams bond toner to paper * Ink jet - fine stream of ink * Dot Matrix - pins & ribbon What else can you think of?4. Storage Storage, or mass storage refers to various techniques and devices for storing large amounts of data. The earliest storage devices were punched paper cards, which were used as early as 1804 to control silk-weaving looms. Modern mass storage devices include all types of disk drives and tape drives. Mass storage is distinct from memory, which refers to temporary storage areas within the computer. Unlike RAM memory, mass storage devices retain data even when the computer is turned off. The smallest unit of storage is a file that contains such data as a resume, letter, budget, images or any one of the thousands of items that you may have saved for future reference. Additionally, files can be executable program files, or system files reserved for the operating system. Mass storage is measured in kilobytes (1,024 bytes), megabytes (1,024 kilobytes), gigabytes (1,024 megabytes) and terabytes (1,024 gigabytes). Examples of some mass storage devices * Disk storage - hundreds of thousands of cycles latency, but very large ** Floppy Disks: Relatively slow and have a small capacity, but they are portable, inexpensive, and universal ** Hard disks : Very fast and with more capacity than floppy disks, but also more expensive. Some hard disk systems are portable (removable cartridges), but most are not. * Tertiary storage - ** Optical storage: Unlike floppy and hard disks, which use electromagnetism to encode data, optical disk systems use a laser to read and write data. Optical disks have very large storage capacity, but they are not as fast as hard disks. Examples: CD, CD-R, CD-RW, DVD or DVD-R ** Tapes: Relatively inexpensive and can have very large storage capacities, but they do not permit random access of data. * Flash Memory - faster than disk storage, with up to 4GB or more of data, transferring (usually) over universal serial bus (USB) POONAM VALERA GUJRAT JAMNAGAR p_aum_k@yahoo.co.in
When was December Looms created?
December Looms was created in 2007.
Why did the Egyptians use looms?
They used looms to weave cloth for their clothes.
When was Mark Looms born?
Mark Looms was born on March 24, 1981.
What is Mark Looms's birthday?
Mark Looms was born on March 24, 1981.
What was the power looms necessity?
a machine that weaves clothes and 15 to 20 power looms are present in a mill
How old is Mark Looms?
Mark Looms is 30 years old (birthdate: March 24, 1981).
What actors and actresses appeared in Looms - 2014?
The cast of Looms - 2014 includes: Ellen Soderberg as Daughter
What are fabrics woven on?
Looms.
What are the ratings and certificates for A Lass o' the Looms - 1919?
A Lass o' the Looms - 1919 is rated/received certificates of: UK:U
What does looms of the shade mean?
No suggestions
Are all rainbow looms is poisonous?
no
What stores sell rainbow loom?
michaels, indidgo, target sells looms that r not rainbow loom but they r still looms
