OPC=40kg/bag
Ave Density of '=1440kg/m^3Vol of 40kg/bag OPC=40/1440
0.028 CM
The volume is(1000)/(density of cement in kg/m3) cubic meters.
One cubic meter of concrete is equal to 1.308 cubic yards of concrete. If there are 5 1/2 bags of cement in 1 cubic yard of concrete, there would be 7.2 bags in 1 cubic meter of concrete. These are the 94 pound bags of portland cement or roughly 40kg bags so figure 8 bags total. Some will be left over
Indeterminate value! You can't convert from kg to m³ since kg measures mass while m³ measures volume. These units are thus incompatible to each other.
F = M AM = F/A = 200/5 = 40 kg
That depends on the size of your bags! My bags are 25 kg (20 l) 5 inches is 120 mm I would use 2 bags of cement and 4 bags of sand and 6 bags of gravel (well I do not buy my gravel in bags but the equivalent volume). I would mix with as little water as necessary to get a pourable consistency.
4
to calculate the volume of any bag we need to know the density. In freshly packed bags the standard density is 1440 kg/m3.Example: to know the volume of a 50kg cement bag we divide the bag weight by the density, i.e.:50 kg ÷ 1440 kg/m3 = 0.0347 m350kg = 0.0347 m3,50kg = 1.23 CFT======================================In the USA, a bag of cement usually weighs 94 pounds and has a volume of 1 cubic foot.
A 50 kg cement bag will hold about 1.3 cubic feet of dry cement powder.
The volume is(1000)/(density of cement in kg/m3) cubic meters.
0.1865 bag
as unit weight of cement varies from 830kg/cu.m-1650kg/cu.m volume of cement of 50 kg. varies 0.060241cu.m to 0.030303cu.m if the cement is port-land cement unit weight would be 1440kg/cu.m then the volume would be 0.034472 cu.m
A 50kg bag of cement is generally 33l. Generally 2 x 50kg bags fill 1 x 65l wheelbarrow. If you are unsure, read the back of the bag. Or check with your manufacturer. The RD is a comparison with the same volume of water at a controlled temperature. This should not be used to calculate the volume of cement in a bag. Use the Bulk Density of that type of cement. That info can be obtained from the manufacturer. An example is Ordinary Portland Cement (OPC) has a bulk density of 1500kg/m3. This means it is 1.5kg/l. 50kg/1.5 = 33.3l.
26 bags (40kgs cement bag)
It is usually 50kg.
20" x 30" x4"
50 kg gross
1 bag=50kg=1.25cft 1 bag=50kg=1.25cft 1 bag=50kg=1.25cft 1 bag=50kg=1.25cft 1 bag=50kg=1.25cft 1 bag=50kg=1.25cft 1 bag=50kg=1.25cft 1 bag=50kg=1.25cft 1 bag=50kg=1.25cft 1 bag=50kg=1.25cft 1 bag=50kg=1.25cft