The mass wetness at which the soil stiffens from a plastic to a semi rigid and friable state.it is the water content at which soil begins to crumble on being rolled into thread of 3 mm diameter
Plastic is an insulator. but most of the paper is not insulated, because the paper in general contains water, although the content is very low, but enough to pass current, but there also is a special insulation paper, that is on the special purpose. so in dry conditions, and the cup has no water, a plastic cup is a better insulator than a paper cup.
Plastic that float on or near the surface of water.
Osmois is the continual movement of water from a higher solution of water content through a semipermeable membrane into a solution of lower water content. Therefore, ososis occurs in a downward direction from higher to lower water content.
Sure. There are many brands of polymer plastic water tanks out there. Here's one example: http://www.pplmotorhomes.com/parts/rv-pumps-water/plastic-water-tank.htm?source=froogle_p
no as soon as you see the content you may not be swallowed
The mass wetness at which the soil stiffens from a plastic to a semi rigid and friable state.it is the water content at which soil begins to crumble on being rolled into thread of 3 mm diameter
Each plastic has a specific compositon.
Moisture content is the amount of water absorbed by the substance due to surrounding humidity while, Water content is the amount of water present as a volatile component of a substance.
Beef jerky has very little water content as it is dehydrated meat. The water content is usually 0.75 percent of the serving.
all food has some water content unless dehydrated.
Plastic is an insulator. but most of the paper is not insulated, because the paper in general contains water, although the content is very low, but enough to pass current, but there also is a special insulation paper, that is on the special purpose. so in dry conditions, and the cup has no water, a plastic cup is a better insulator than a paper cup.
Onions typically contain about 89% water by weight.
The term plastic limit speaks to the characteristics of (fine grained) soil and how it behaves with different moisture content. Let's keep it simple. If the soil is nearly saturated, it will be "very" plastic and will act like play dough. If it's dry, it crumbles. There are no plastic characteristics. Different soils (different clay, sand or whatever in their content) act a bit differently with the same moistue content. Some will still be more plastic than others with a given moisture content. That's where the lab comes in. A given soil sample will have to be experimented on to determine its plastic limit. Wikipedia has an article posted on Atterberg limits, which include this soil characteristic. As this is WikiAnswers, a link is provided.
All plastic items float on water, so therefore a plastic boat floats on water.
depends if the plastic is heavier or lighter than water and if its hold air which is lighter than water
Because they DO have such a high water content.