0
About 4 grams.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is the weight of one sheet of drywall 4'x8'x38?
If you mean 4x8 x 3/8 -then its about 38 pounds.
What is the weight of 1'' shaft liner drywall?
1" drywall weighs approximately 3.4 pounds per square foot.
What is the weight of one sheet of drywall 12'x2x1?
Approximately 82 pounds.
Average weight of 100 screws in box 'A' is 10.4gms it is mixed withed with150 screws of box 'B' average weight of mixed screws is 10.9 gms find the average weight of screws of box 'B'?
Let 'x' be the total weight of 100 screws in box 'A' therefore, average weight of 100 screws in box 'A' = (x / 100) = 10.4 => x = 100*10.4 = 1040 gms ............ (1) Let 'y' be the total weight of 150 screws in box 'B', therefore, average weight of 150 screws in box 'B' = (y / 150) .......... (2) After mixing 100 screws of 'A' and 150 screws of 'B', average weight of 250 screws = (x+y)/250 = 10.9 => x+y = 250*10.9 = 2725 => 1040+y = 2725 => y = 2725 - 1040 = 1685 => total weight of 150 screws of box 'B', y = 1685 gms Substitute y = 1685 in eqn (2), => average weight of screws of box 'B' = 1685/150 = 11.23 gms (approx) Hence, average weight of screws of box 'B' = 11.23 gms SHORT ANSWER """"""""""""""""" Given data: No. of screws in box 'A', NA = 100 No. of screws in box 'B', NB = 150 Average weight of 100 screws in box 'A', XA = 10.4 gms Average weight of mixed screws, XAB = 10.9 gms Average weight of 150 screws in box 'B', XB = ? Therefore, XAB = (NA XA + NB XB) / (NA + NB) 10.9 = (100*10.4 + 150XB) / (100+150) 10.9 = (1040 + 150XB) / 250 10.9*250 = 1040 + 150XB 2725 = 1040 + 150XB 2725 - 1040 = 150XB 1685 = 150XB XB = 1685/150 = 11.23 gms XB = 11.23 gms - Ratnakar Sharma
Is drywall an insulator?
yes drywall is an insulator
How many 2 Drywall screws per pound?
How big of a box? They are normally sold by weight.
What is the typical size of drywall screws?
Length will vary from 1" to 1-3/4" for various thicknesses of drywall and application types.
What would you use to hang sheetrock on a wood stud?
You can use drywall nails or drywall screws. I prefer the screws.
What fastener is used for hanging a piece of sheetrock on a wood stud?
You can use drywall nails (ridged) or drywall screws. I am not a drywaller, but have done lots of it and prefer the screws.
Use Anchors When Hanging LED TVs ?
You cannot just hang LED TVs on the wall with screws alone. The screws will pull out of the drywall and the television will fall to the ground. To keep this from happening, you need to use wall anchors instead. These are made of plastic, and you can put them into the drywall. You can then put the screws into the anchors. This will make sure that the weight of the television does not cause it to fall.
What is the gauge of drywall screws?
Commonly #6 gauge.
Number of screws per sheet of drywall?
20
When is it better to use drywall screws?
Metal drywall screws are usually fit with a small plastic pre-grooved sheath which taps the screw into the drywall and wooden beam behind it. This results in a clean and secure penetration of the wood for each screw.
What are drywall screws numbered as?
The most commonly used are #6.
Can grabber screws be used for drywall?
Yes, that is exactly their purpose.
Are drywall screws bad for roofs?
No, they are adequate for many uses.
When were drywall screws first used?
They evolved in the 1970's .
