(dxd)/162 wher d is the daimetre of steel bar
Not possible to answer ! A micron - is a linear measurement... GSM is a measurement of weight !
density units are kg per cubic meter. if you reduce the weight, and reduce the size they cancel out, and the density is the same.
22.62 miles per hour
It is suggested that you have an increased heart rate for 30 minutes two times per week to maintain body weight, and if you want to lose weight you need to increase it to 30 minutes per day four to five times per week.
depends on the quality- it can range from $8 to $20 depending on what its made of- chiffon, silk, spandex. etc. polyester chiffon is about $11 per metre at spotlight.
22mm diameter deformed bars unit weight kilogram per meter
To calculate the number of 40mm high yield bars in one ton, we need to know the weight of each bar. Typically, high yield steel bars have a specific weight per meter or per foot, depending on the region and standards used. Once we have this weight, we can then determine how many bars are needed to make up one ton. Let's assume a common weight for a 40mm high yield steel bar is 6.22 kilograms per meter (kg/m). 1 ton is equal to 1000 kilograms. Now, we can calculate the number of bars: Number of bars = (Total weight in kg) / (Weight per bar in kg) Number of bars = 1000 kg / 6.22 kg/m Number of bars ≈ 160.77 bars So, approximately 160 to 161 40mm high yield bars would make up one ton, given the assumed weight per meter of the bar. Keep in mind that actual weights may vary slightly depending on the specific type and grade of steel used.
For Mild Steel Bars: Diameter (in inches): 1/4" Weight per foot: 0.167 lb/ft Diameter (in inches): 3/8" Weight per foot: 0.376 lb/ft Diameter (in inches): 1/2" Weight per foot: 0.668 lb/ft Diameter (in inches): 5/8" Weight per foot: 1.043 lb/ft Diameter (in inches): 3/4" Weight per foot: 1.502 lb/ft Diameter (in inches): 1" Weight per foot: 2.670 lb/ft For High-Strength Deformed (HSD) Steel Bars (commonly used in construction): Diameter (in millimeters): 8 mm Weight per meter: 0.395 kg/m Diameter (in millimeters): 10 mm Weight per meter: 0.617 kg/m Diameter (in millimeters): 12 mm Weight per meter: 0.888 kg/m Diameter (in millimeters): 16 mm Weight per meter: 1.579 kg/m Diameter (in millimeters): 20 mm Weight per meter: 2.467 kg/m Diameter (in millimeters): 25 mm Weight per meter: 3.853 kg/m
Formula for steel bar weight per meter = D2/162 where D is diameter of bar
3.85
.4017
DxD/162 this is the formula for finding unit weight of steel
what is the weight od 25x25x3 mm mild steel angle per meter
steel pipe 200mm per meter kg wait
The dimensions of the steel are required.
4.83kg/m
3 KG / Meter