.888kg/m
The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.
785okg/m3
It is a deformed round steel bar and has a diameter of 12mm.
The numbers refer to the different diameters of the rebar used to reinforce the concrete. R specifies round bar. Y or N specify deformed bar. See below. == * Round mild steelreinforcement bar - R6 R10 R12 R16 R20 R24 R28 R33 * Deformed reinforcement bar - N12 N16 N20 N24 N28 N32 N36 * Stock lengths of reinforcement bar - up to 12 metres * S12 Pool Steel - Mild steel bars (not tempcore) that is very easy to bend by hand * Processed reinforcement bars - custom cut and bent to required needs * Dowel Bars - precut, often galvanised round bars used when one slab joins another * Galvanising - Plain Reinforcement Steel bars can also be supplied galvanised *Deformed Bar was previously called Y-Bar eg: Y12, Y16 but through product improvements the tempcore strength was increased (now 500Mpa) and is now denoted as N-Bar as listed above
I think the bar along the span is main bar
0.887 kg per m
The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.
12mm
Weight is 1.579 kg/m
785okg/m3
0.39 kg/metre
It is a deformed round steel bar and has a diameter of 12mm.
mass=density/volume
The numbers refer to the different diameters of the rebar used to reinforce the concrete. R specifies round bar. Y or N specify deformed bar. See below. == * Round mild steelreinforcement bar - R6 R10 R12 R16 R20 R24 R28 R33 * Deformed reinforcement bar - N12 N16 N20 N24 N28 N32 N36 * Stock lengths of reinforcement bar - up to 12 metres * S12 Pool Steel - Mild steel bars (not tempcore) that is very easy to bend by hand * Processed reinforcement bars - custom cut and bent to required needs * Dowel Bars - precut, often galvanised round bars used when one slab joins another * Galvanising - Plain Reinforcement Steel bars can also be supplied galvanised *Deformed Bar was previously called Y-Bar eg: Y12, Y16 but through product improvements the tempcore strength was increased (now 500Mpa) and is now denoted as N-Bar as listed above
0.616 kg/m according to BS standard
Unit weight of 22mm dia reinforcement steel bar is 3 kg per metre length - Answer by m. Velsamy mobile 09884585625
170 Y12 Bar to the ton at 6000 M long