The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.
It is a deformed round steel bar and has a diameter of 12mm.
Formula for steel bar weight per meter = D2/162 where D is diameter of bar
The numbers refer to the different diameters of the rebar used to reinforce the concrete. R specifies round bar. Y or N specify deformed bar. See below. == * Round mild steelreinforcement bar - R6 R10 R12 R16 R20 R24 R28 R33 * Deformed reinforcement bar - N12 N16 N20 N24 N28 N32 N36 * Stock lengths of reinforcement bar - up to 12 metres * S12 Pool Steel - Mild steel bars (not tempcore) that is very easy to bend by hand * Processed reinforcement bars - custom cut and bent to required needs * Dowel Bars - precut, often galvanised round bars used when one slab joins another * Galvanising - Plain Reinforcement Steel bars can also be supplied galvanised *Deformed Bar was previously called Y-Bar eg: Y12, Y16 but through product improvements the tempcore strength was increased (now 500Mpa) and is now denoted as N-Bar as listed above
density of galvanized steel 7850kg/m3
The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.
It is a deformed round steel bar and has a diameter of 12mm.
170 Y12 Bar to the ton at 6000 M long
12mm
Yes - It does
Formula for steel bar weight per meter = D2/162 where D is diameter of bar
0.887 kg per m
The numbers refer to the different diameters of the rebar used to reinforce the concrete. R specifies round bar. Y or N specify deformed bar. See below. == * Round mild steelreinforcement bar - R6 R10 R12 R16 R20 R24 R28 R33 * Deformed reinforcement bar - N12 N16 N20 N24 N28 N32 N36 * Stock lengths of reinforcement bar - up to 12 metres * S12 Pool Steel - Mild steel bars (not tempcore) that is very easy to bend by hand * Processed reinforcement bars - custom cut and bent to required needs * Dowel Bars - precut, often galvanised round bars used when one slab joins another * Galvanising - Plain Reinforcement Steel bars can also be supplied galvanised *Deformed Bar was previously called Y-Bar eg: Y12, Y16 but through product improvements the tempcore strength was increased (now 500Mpa) and is now denoted as N-Bar as listed above
5X = Y12 ???? If so...., Y12 = 5X Y = 12th root(5X) ===============
Steel has the greatest density of the three.
The density of steel as per IS 2062 will vary. This is because steel's density typically changes with composition.
The density of aluminized steel is 2710. Additionally, the density of its counterpart, carbon steel, is slightly different at 2833.