Other than black is usually ground there are far too many wire colors to try to list them all here. I would suggest you look in either a factory service manual, a Chilton manual or a Haynes manual for the schematics, they usually show the colors for the wires in the individual circuits.
The firing order on a 1986 Chevrolet Celebrity V6 is: 1-2-3-4-5-6.
location and wiring of the horn relay
what type of engine do you have?? V6
On the 2.8L V6 the distributor cap is held on with two screws. Unscrew the two screws and pull straight up on the distributor cap to remove it from the distributor.
I found one source that says a 1986 Chevy Celebrity has a curb weight of 2714 pounds. Different options would change that weight.
To change the alternator in your 1986 Chevrolet Celebrity: 1, Remove the battery ground cable. 2. Unplug remove the wiring from the alternator. 3. Loosen the bolts that hold the alternator in place. Remove the drive belt. 4. Remove the bolts and the alternator will pull out. Reverse the process to reinstall the new alternator.
The taillights are supposed to go on when the headlights are activated.
It should be: 181KEJCOEJ
The last year the Chevrolet Celebrity was produced was 1990, not 1992. And although there were some minor changes, the car was largely unchanged between 1986 and 1990. The standard I-4 engine is exactly the same, as well as the frame and body. I believe the headlight arrangements may have changed, as well as some of the dash detailing and the standard radio, but overall the car is largely the same.
The fuse box is on the bottom of the dash on the right side of the steering column.
Attach the wiring harness to the and of your 1986 Chevrolet Caprice ignition switch. Slide the ignition switch into the ignition slot. Tighten the ignition switch with the retaining ring.
The firing order for all years of Chevrolet Celebrity V6's is: 1-2-3-4- 5-6