It's the depth of the cut from the crest of the surface down to the base on a bolt or screw.
It depends which thread the screw is, the pitch and depth of the thread varies.B.S.F. - 5.3 mmWhitworth - 5.10 mmB.S.P. - 11.80 mmU.N.F. - 5.50 mmU.N.C. - 5.2 mmA.N.C., A.N.F. and B.A. threads are numbered, I.S.O threads are in metric
EUE thread is a pressure sealed thread as usual completion pup joints thread
No, a thread can't create aprocess, because the environment of the thread is a part of a process which created this thread.
No, Main is not a daemon thread in Java. its a non daemon or user thread. Also any thread stem from Main will be non daemon because daemon is derived from parent Thread status.
thread is a light weight program . concurrent execution of code can be done by usin threads.thread is a part of the program.
A device to measure the tire's thread depth.
A device to measure the tire's thread depth.
demonstrates depth
A PTF thread is the same as a NPT thread except that it has one thread less at the small diameter end. It is used when there are space (depth) considerations.
0.866xpitch
Effective or Pitch diameter.On a parallel thread it is the diameter of an imaginary cylinder which would pass through the threads at such a point that both male and female thread were the same width. This point is usually but not always 1/2 the thread depth. It is only at 1/2 depth when the root & crest radii are the same.
Thread size of bolts is calculated by measuring the depth, width, and length of the threads. This helps to identify specific bolts and patterns.
The Legal minimum thread depth is 2/32". But should be replaced if under 4/32" in spite of the legal minimums.
in Illinois it is 4/32 front tires and 2/32 all tires
In Virginia you must have 2/32 tread depth on all 4 tires to pass inspection.
The normal racing tyres are slick and have no tread. The intermediate tyre has a 2.5mm tread, and the full wet has a 5mm tread.
In Oregon there is no minimum thread depth, but just that Oregon requires that tires be in safe operating condition, without any bulges or exposed cords.