Torque is simply twisting force.
It is stated in the USA as Foot/Pounds
Simply a one foot lever with a 1 pound weight on the end will provide 1 foot pound of torque.
EG: A torque wrench measures the amount of force applied to a nut or bolt.
Torque is not measured as a percentage.
Yes
Power is measured in both torque and horsepower.
In SI, torque is measured in newton metres (N.m). The percentage torque varies according to the design and specifications of a motor.
A torque curve is a plot of torque produced vs RPM, as measured on a dynamometer. It usually is not linear (a straight line).
The Polaris Sportsmen 800 has 120 pounds of engine torque. The torque is measured at the flywheel. There is only 100 pounds of torque at the ground.
Torque is defined as force multiplied by the distance, from the axis of rotation, at which such as force is applied.In the case of an engine, I believe the torque would have to be measured.
the bottom part of the car is it A: Torque is grunt, the pulling power of the engine, measured in Horse power.
Foot Pounds
The torque produced by the cars engine will be both static and dynamic, depending on where it is measured.If the torque is measured in the crankshaft, there will be large dynamic torque fluctuations as each cylinder fires and its piston rotates the crankshaft.If the torque is measured in the drive shaft it will be nearly static because the rotational inertia of the flywheel and transmission will dampen the dynamic torque produced by the engine.So the torque which fluctuates based upon the operating condition & other amplification factors, is called dynamic torque.Saurabh Solanki
Torque tester is a type of transducer, specifically a torque transducer that converts a torque measurement (reaction, dynamic or rotary) into another physical variable, in this case, into an electrical signal that can be measured, converted and standardized.
pounds of force Foot pounds or torque. Measured with a torque wrench.