while the time of cable pulling after the work some cable will be waste. so we are making role of that that is twisted pair in cables
with RJ 45 conecter & unshilded twisted pair cable
Because we need to connect a sender line of one computer to be connected to the receiver of another computer and vice versa. So it is required to use twisted pair in computers
1) Router 2) Switches 3) Bridges 4) Cables (Ethernet, Twisted pair, Coaxial, Fiber optic etc) 5) DSLAM 6) EDN, ECN
There is the USB cable and the twisted pair cable (Cat 5 and Cat 6) for networking.
STP is shielded twisted pair - used in data communications.
One of the best networking cables to purchase would be the TUP or the Unshielded Twisted Pair. The cable is a 4 pair, 100-ohm which has four untwisted pairs surrounded by the exterior jacket. It's wound up style is utilized for the purpose of canceling noise which may interfere with the signal to the computer. Most coming in the USA.
That question is very vague. It could refer to varieties of power, telephone and computer network cabling. If you are referring to computer networking this is usually called UTP (unshielded twisted pair) cabling.
UTP Cable stands for Unshielded Twisted Pair cable. It doesn't provide electromagnetic interference from any electronics nearby the wiring, but is cheaper to buy than Foiled or Shielded Twisted Pair. Unless outside Electromagnetic Interference is more than a minor concern, I would suggest sticking to UTP. Also the most common used cabling in computer networking.
UTP Cable stands for Unshielded Twisted Pair cable. It doesn't provide electromagnetic interference from any electronics nearby the wiring, but is cheaper to buy than Foiled or Shielded Twisted Pair. Unless outside Electromagnetic Interference is more than a minor concern, I would suggest sticking to UTP. Also the most common used cabling in computer networking.
we use twisted pair wire for a phone becaues twister cable is 2 form shilded and unshilded unshilded cable is good for transmission both data and voice and its frequency range is fast it is consist 2 conductor.
The minimum category cabling for networking is cat 3 cable. That cable will allow you to transmit and receive on a LAN at a maximum of 10 Mbps.
Obviously the hardware router of wi fi signal has a malfunction. So a process known as magnetic repulsion is used so that the twisted pairs oof wires do not interfere within the wireless networking. P.s these are not the disadvantages