To measure the current in the circuit an ammeter is used and it is connected in series
Multimetres are generaly used to measure the following quantities. Voltage: multimeter is connected in parallel with the Load; Current: multimeter is connected in series with Load; Resistance: the resistor must be taken out of the circuit first, then, the probes from the multimeter are connected across the resistor,
An ammeter measures the electrical current in something. A digital one is calibrated to display through the shunt and convert information from the analog model.
An Ammeter connects a low impedance on the test points, so the equivalent of that is a "short circuit" between the test points. This is done to avoid a drop of current on the tested circuit. A Voltmeter connects a high impedance on the test points, so the equivalent of that is a "open circuit" between the test points. This is done to avoid a drop of voltage on the tested circuit. --------- In terms of external connections Ammeter (used to measure current) is connected in series of the circuit (through which the current flow need to be measured) and voltmeter (used to measure voltage) is connected in parallel to points in circuit (across which voltage needs to be measured).
no. it,s only used to measure D.C
Wattmeter is an intrument which is used to measure the power consumption of an Electric circuit or an appliance which is connected to the supply in terms of Watts.
The purpose of an ammeter is to sense and display the magnitude of the current flowing through it. When connected in series with a branch of an electrical circuit, the meter displays the magnitude (and direction) of the current in that path ... which you can't otherwise tell just by looking at the circuit.
Current transformers are used to measure electric currents. When current in a circuit is too high to directly apply to measuring instruments, a current transformer produces a reduced current accurately proportional to the current in the circuit, which can be conveniently connected to measuring and recording instruments.
Multimetres are generaly used to measure the following quantities. Voltage: multimeter is connected in parallel with the Load; Current: multimeter is connected in series with Load; Resistance: the resistor must be taken out of the circuit first, then, the probes from the multimeter are connected across the resistor,
An ammeter is a measuring instrument used to measure the electric current in a circuit.
It measures the current.
Voltmeter should be connected always in parallel to a circuit ANSWER : IT should be in parallel except when used to measure current. Then it should be placed in series across a shunt.
To measure the current in a DC circuit an ammeter may be used. This ammeter may consist of a sensitive meter with a shunt in parallel with it to divert part of the current. In case even more current is expected than the full scale reading of the meter an additional shunt may be connected in parallel with that arrangement.
An ammeter is used to measure the current through a circuit and thus it must be in series with that load. Also, it's resistance is so low that it cannot be connected in parallel since it will result in a short circuit. A Voltmeter is intended to measure the voltage across a circuit and thus it must be connected in parallel. It has a very high resistance such that connecting it in series with a circuit will lender the circuit useless or inoperative.
"ammeter"
An ammeter measures the electrical current in something. A digital one is calibrated to display through the shunt and convert information from the analog model.
:) It's connected together
An Amp Meter