need to no if the first valve is intake or exhaust The intake valve is always bigger than the exhaust valve.
There are a variety of places where one can purchase SBC aluminum heads. One can purchase SBC aluminum heads online on the eBay website, and other retailers as well.
You can purchase SBC heads online at the Super Chevy website as well as through the popular auction website eBay. You might also be able to have them ordered to your local parts store.
on the vin coad its the eighth diget on the vin plate if you dont have a vin if your valve covers bolt in the middle with 4 bolts it is a 305 if they bolt on the edges 4 bolts then it is a 350 That answer is wrong. A 350 has a 4" bore. A 305 has a smaller bore. All SBC made after 1986 have the center bolt valve covers, no matter what size motor it is. All pre-86 SBC have perimeter valve cover bolts.
Yes, the bolt pattern is the same for all small blocks (as long as they're the same generation sbc). only thing to consider is your compression ratio. and if you're swapping the heads make sure your intake ports, exhaust ports and valve cover bolts are all the same.
depends on what class your running, you can be very limited!
SBC 350
350 chevy with aluminum heads and intake carb and headers weigh
the water jackets are different , the motor will keep running hot
283 SBC Corvette
SBC engines are filled at the valve cover. There should be a removable cap on one.
i believe it is a 64cc chamber head, with 2.02 intake valve