0
a vortex
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Is their a way to make a 90 305 none votex intake work on 96 vortex heads?
no!
Does a votex form when a bathtub is drained?
Yes, it is very common for a vortex to form in a bathtub as it drains.
Do Nerf glow darts work in Nerf maviricks?
yes it works in all nerf guns except nerf votex and clip sytems
Is a water spout a whirlpool?
No. A waterspout is an intense columnar vortex (usually appearing as a funnel-shaped cloud) that occurs over a body of water and is connected to a cumuliform cloud. It is a essentially a non-supercell tornado over water. In comparison, a whirlpool is a votex that occurs inside a body of water, forming a depression which sucks objects deeper into the water.
How do you make a cloudbuster?
You take a 5' or 6' copper pipe 3/4" or 1" pipe and take a block of wood, I used a 2X4 and place on the top of this pipe. Take a hammer and bound onto the board which will drive the pipe into the ground. You will want to go into Mother Earth atleast 1-1/2' so the pipe will stand on it's own. If you are in an area where the ground is frozen, take hot water and keep pouring on the spot where you want to place the Earth CB, this will help thaw out the area. After getting the pipe in the ground and standing, you can take some crystals I used single terminated crystals about 5 of them and dropped them into the pipe so they will lay on Mother Earth. Next you will take some curly aluminum metals and drop some down the pipe. I used copper coated bb's next and zinc bb's next as I love to use them in all my creations. Then next I put some copper spirals and SBB coils I made. You want to make sure that you don't over do this bottom part and you leave plenty of space empty at the top of the pipe. This will allow the Dead Orgone to come in and let the Positive Orgone back out. Next you can mix up your resin and hardener, this is the time to add activated charcoal if you want, the liquid colliodal vitamins and minerals, put this into the resin first before the hardener and mix real well. Finally add your hardener and you will put more than required since you added liquid to the mix. Take this outside to the Earth CB and pour into the pipe. Now if you want to know how much is in the bottom and if it is covering what you put in there, take a flashlight and keep flashing it down the pipe, you will see the liquid when enough has been poured. Tap ingredients down with a stick and if you need to add more resin then do so. The pipe will then become hot, very hot so be careful around it. Now is the time to sit back and watch. I saw the ground making waves and the air around the pipe start to be wavy. I can't see elementals or devas but someone on the CB forum reported that he could see them hoovering above the Earth CB. Others who are energy sensitive can also see the orgone shooting out of the pipe and into the air. Other things you can try is putting pipes at different lengths around the middle one.....putting other pipes into the ground at 33 degrees and putting the same thing in them and then pouring the resin, everything will be at an angle this way.....I want to use short pipes for this one and see what happens. Also you might be able to use shorter wider pipes in the ground also, not sure on this one but sounds like it would work. It is very limitless in my mind. I believe this is like giving Mother Earth accupuncture and if done on ley lines and in votex' might see a Hugh difference in the outcome. Also I believe if there are any underground bases it will help with those as well. Easy to take short pipes into the woods, and plant these Earth CB's everywhere.....easy to take your ingredients with you, and your resin and harder and mix right there on the spot. Just some idea here, the truth is in trying it and experiencing it on your own. Very inexpensive way for everyone to enjoy the benefits of a CB and helping Mother Earth, Mankind and the Universe. Hope this explains and helps, if you don't understand something please ask and I will try and clarify what I meant. Enjoying clear blue skies here with no clouds and a crispness of winter.
Can a helicopter land in water?
when they crash in the water they certainly can - of cousre there is the mythical flying sub from "voyage to the bottom of the sea" - it is possible to make a winged craft or lifting body that would "fly" underwater but its ineffecient since underwater craft dont need to fly as it is more effecient to make them bouyant - wings are used in subs in the form of control surfacesif one were to design a "flying sub" then the design from "voyage" is probably the most practical using a lifting body design - wings would be too fragile due to the heavy weight of water creating huge forces on the wingsBathtube AerodynamicsYes. By this I mean that a plane can "fly" under water just as it does in the Air. In the 1960's, a professor at Mississippi State University, Professor August Raspett, helped design STOL vehicles and was involved in other aerodynamic research. Today the aerodynamics lab located at the local airport is named after him. Professor Raspett and his young son wrote a technical paper called "Bathtube Aerodynamics". It was actually his son's idea and his father assisted. The son wanted to take a model airplane and try to fly it in the water. The typical model he used was the scale plastic models----or as you would call them---plastic kits. It actually works. Why? The equations for fluid flow is the same for AIR as it is for WATER. Only the Reynolds Number changes.First you have to trim the model for proper CG. Plastic kits are built to scale but the model is not have correct Center of Gravity. Some models had to be altered. Some holes have to be plugged. For example: a model of a jet may have a large opening for the engine inlet which may require plugging to prevent disruption of the flow. The wings and tails have to be perfectlly aligned so they will produce lift. If it had a propellor, then it had to be removed to reduce drag. The model can then be launched under water and it will glide just like it was in AIR. Since the Reynolds Number for water is higher, the model will "fly" slower in water---but it will still fly.He also tested different models using rubber-band powered propellors. And they could glue some chemical(forgot what you call it) to the model and as it went through the water it would leave a blue contrail left from the chemical exposure to water. This could be used to study the votex and airflow.Really cool. Possibly a great idea for a high school science project.Link to a list of technical papers by Professor Raspet that includes "Bathtube Aerodynamics"http://w3.gwis.com/~mks/book.htmOther Related Linkshttp://www.ae.msstate.edu/rfrl/pages/capabilities.htmlhttp://www.aiaa.org/content.cfm?pageid=406&gTable=Paper&gID=45046Photo XV-11 Marvel designed by Dr. Raspet and MSU.http:/www.aerofiles.comMSU-xv11a.jpgMORE ABOUT "BATHTUB" AERODYNAMICSsome fish actually fly like airplanes - fish like sharks have no swim bladder to keep them bouyant so have to stay in motion, or fly, to keep from sinking - many like the shark have bodies that are lifting bodies and their fins can act like wings to give extra lift - think of the manta ray as the ultimate marine aircraft.Also Penguins and even ducks can "fly" underwater. Of course they have the advantage of flapping wings instead of fixed wings.
