Fuses That "Blow" Repeatedly
Without being able to "hands on" troubleshoot the circuit served by the repeatedly blowing fuse, none of us can identify the specific defect which is causing your problem.
Therefore, the following generic answer can be applied to any electrical circuit, whether in a vehicle, or in a building, or whether alternating current [AC] or direct current [DC].
Fuses [and Circuit Breakers] are safety devices designed and installed in electrical circuits TO PROTECT the conductors [wires] and other components from short circuit conditions and/or overload conditions which cause an extremely large flow of electrical current [measured in Amperes], which causes overheating of the conductors that results in damage to the insulation and the conductors.
And in a worst case scenario, the probability of a FIRE which could destroy the vehicle, house, or other structure in which the circuit is located.
When a fuse or Circuit Breaker [and replacement fuses, or repeatedly "tripping" Circuit Breakers] "blow," especially if it happens repeatedly, is an indication of an UNSAFE CONDITION in that circuit, usually a short.
The fuse or circuit breaker is doing what it was designed, intended, and installed to do, that is to protect the conductors and components of the circuit which it serves.
The proper "fix" for this issue is for a qualified technician, who knows what he or she is doing, to troubleshoot the involved circuit, find and identify the defect, and make proper repair [s], BEFORE replacing the fuse again [with the properly sized fuse or before resetting a circuit breaker].
Some ignorant few people will suggest installing a larger fuse or breaker to solve the problem, BUT that will only increase the hazard, not correct it.
Do not follow "bad" advice by installing a larger fuse in a misguided attempt to correct the problem. To install an oversized fuse would almost guarantee damage to the wiring and the probability of an electrical system fire.
Had the same prob with mine it was the inter light at the back was touthing the metal work hope this helps
Depends on what circuit it is protecting. Your owner's manual will list the correct size. DO NOT put in a bigger fuse than is required or you may burn your car up.
Blown head gasket or air lock in cooling system.
A fuse that keeps blowing is an indication of a malfunctioning ignition. The ignition may be the culprit or the wiring leading to the ignition may be the problem.
Motor hasseized.
keeps coming on trip consumpion on clock how do i take it off
2006 Ford Focus rear defroster keeps blowing the fuse immediately after replacement
Obviously, if any fuse keeps blowing there is a serious fault in that circuit.Take it somewhere they can fix it.
Compressor may be locked up.
You need to find the cause of the short.
fuse keeps blowing
The Earth's gravity keeps the gasses in the atmoshere drawn to the planet.