probably your altenator or batterys power is focused on one point of output
The Chrysler Sebring cruise control switch is located beneath the dashboard, on the drivers side. The cruise control switch should be labeled as such.
The cruise control module of a 1993 Mercury Villager is located under the passenger side of the dashboard.
There is no fuse for the cruise control on a 1994 Acura Integra. It is a relay switch under the hood near the battery. This would have nothing to do with the dashboard clock, if the cruise control is not working properly. If the cruise control is not coming on, check the relay, then check the carburetor or EFI (Electronic Fuel Injector). Also, the cruise control will not come on if the brake light switch or the clutch is not working properly.
Cruise control is active.
To the left of the steering wheel, below the dashboard is a button that says cruise control. Push that button in, the dash will illuminate the cruise control light. Then, as you reach the speed you want to cruise at, push the button on the steering wheel that says "set". When you want to turn cruise control off, simply tap the brake pedal and the cruise will go off.
On my 2000 accord the cruise control panel on the left of the steering wheel is out. But the dashboard light still works and so does the actual cruise control. As long as the cc still works its not a big deal.
On the lower left side of the dashboard is a switch to turn on the cruise control. Depress the switch downward to activate. Once activated, set the speed on the steering wheel speed control.
Yes, the 2005 GMC Envoy has a fuse for the cruise control system. It is typically located in the fuse box under the dashboard or in the engine compartment. If the cruise control is not functioning, checking this fuse is a good first step in troubleshooting the issue. Always refer to the owner's manual for the specific fuse location and rating.
In a 1987 Chevrolet Silverado, the cruise control fuse is typically located in the fuse box, which is found under the dashboard on the driver's side. Refer to the fuse box cover or the owner's manual for the exact fuse designation related to the cruise control system. It's usually a 15-amp fuse, but checking the diagram is recommended for accuracy. If the fuse is blown, replacing it may resolve cruise control issues.
To set cruise control on a Freightliner, first accelerate to your desired speed. Then, press the "Cruise" button, typically located on the steering wheel or dashboard. Once activated, press the "Set" button to lock in the current speed. To deactivate, you can either press the "Off" button or tap the brake pedal.
vacuum or electric what should i look for
Cruise control is an accessory.