First check and replace "dead" bulbs in the tailight housing. If they are all good and still no lights then there is usually some sort of pressure switch the barke pedal pushes on or is released from when pressure is applied to the pedal. This may need to be replaced.
No, the license plate light is wired in with the rear tail lights, not the brake lights.
The brake lights may not work on a 1993 Honda Prelude if the brake light switch is no longer working. The brake light switch is in the steering column just above where the brake pedal is bolted to it. There is also a chance that a brake light fuse is blown.
Check the switch at the brake pedal .
Hey E==The running lights have a module which may be bad. Good luckJoe
it may need some brake fluid
brake lights say lit after ignition has been shut off. lights shut off after hitting the brakes.
My rear window brake light works, but not my tail light brakes on my 1997 Monte Carlo. What is the problem?
Check the fuses for your brakes.
No, if your brakes are flashingyou have crossed circuits.
There is no switch to activate or deactivate the brake lights on a 1988 Nissan. The brake lights automatically turn on any time the brakes are pressed.
every vehicle must have brake lights to indicate that the vehicle is stopping. with no brake lights the vehicle can cause a rear end collision.
It may be wired wrong.