I found alot of Astro part at my local junk yard. most in very good shape. The only thing would be getting the correct color.
its the silver cylinder lugged into the fuse box under the dash board on the drivers side
Check your fuses.
How to remove the dash board in a 2003 Chevy Cavalier. Center A/C vents not working and it squeaks all the time.
there is no skate board but there is a hover board.this is how you work it.First you have to have manure then you have to click on the bag then you have to click on the use button on the manure. Then it's working
The hover board (hovercraft) runs on manure.
There are numerous reasons that can cause the gauges to stop working. In my case, I found a pin on one of the printed circuit boards that had never been soldered. This pin supplied 12 DC power from one board to the other and was black from arcing over the years. This was an intermittent problem that would cause the gauges to come and go. I soldered the pin and the instrument cluster has been working flawlessly ever since. Bad grounds are often the cause for electrical problems in Corvettes.
The most common answer is they are broken, but more specifically if the fuse inside your car blew it would throw the reading off in your temperture and fuel gauges since they run through the same circut board in your car you should definatly check your fuses.
The Electrical board. If it's not the ac shutting off on you, it's the power windows not working.
the hover board is on top of the windmill and it is blue
Numerous gauges not working at the same time are a power issue. The instrument cluster needs to be removes so that the wiring and circuit board connections can be tested.
Check the fuses first. Then check to make sure the wires are hooked up under the dash and also under the hood. You may also have a ground wire unhooked.