The odometer unit has failed and will need replaced.
The most common reason for a 1996 Chrysler Cirrus odometer and RPM gauge to stop working is a fuse. If the fuse is removed from the dash and replaced, often times the odometer and RPM gauge will begin working.
Check your grounding on your temp sending unit.
If it is just those two that have quit, the cluster has failed.If it is just those two that have quit, the cluster has failed.
Get to a shop quick.
In the middle (about 195 degrees).
Over temperature warning.
The gauge has failed.
If both odometer and speedometer are not working I would blame the vehicle speed sensor. If just the odometer isn't working the gauge cluster assembly needs to be replaced with a reconditioned one.
My fuel gauge, odometer and radiator gauge isn't working and my radio says locked. How can I fix this?
Usually the cluster has failed. You will need a new one, or a used one that has the same mileage showing.
The fuel level sensor is on the fuel pump, in the fuel tank.
You need to check the oil pressure with a mechanical gauge.
The fuel tank sending unit(float) is probably bad.
you need to change the speedometer cause if your odometer is counting then speedometer should be working too. make sure your speed gear its working its in the side of the transmission The odometer and speedometer read off of the same signal. If one works, the signal is ok and the other gauge is bad.
A likely cause is a failing instrument cluster.
1. fuel gauge or gas gauge 2. RPM gauge or tachometer 3. Speedometer or Speed Gauge 4. Oil gauge 5. Odometer 6. Electrical gauge 7. Temperature gauge
Mine is not a '96, but on this car and others I have owned - not all Chryslers - the location and amperage of each of the fuses has been detailed in the owner's manual. Check there if you haven't already.
You need to find out where the leak is from and have it fixed.
fuel gauge not working
home many miles your car has driven.the mileage of the vehicle
On the dash, right below the temperature gauge.