0
the more teeth the blade has the better the cut
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Are silicone moldings the best kind of implants to get?
It all depends on you. Silicone are the most popular.
What kind of cuts can you get on table saw?
Rip, cross, dado & "sink".Table saw cuts include rip cuts, crosscuts, miter box cuts and bevel cuts.A rip cut is a cut made parallel to the wood grain.A crosscut is generally at a fixed 90 degree angle.A miter cut involves a table saw with a miter gauge. A table saw with a miter gauge has one or two slots or grooves running from the front to the back of the table. These slots or grooves are used to position and guide the miter gauge or crosscut fence to set the miter cut at a precise angle. With this cut, the material being cut is angled versus the blade.Bevels are cut by changing the angle of the blade with respect to the surface of the wood on the table.
What kind of boots does blade wear in blade trinity?
Black boots?
How do you change Lexus RX 330 rear wiper blade?
Simple. You raise the blade arm off the window until it locks in the upright position. You then pull the blade itself away from the arm until it unlocks from the arm. It kind of snaps in place. It's like bending your finger backwards. Reverse procedeure to install.
What is the kind of blade kills th jabberwock?
The blade that kills the Jabberwock in Lewis Carroll's poem "Jabberwocky" is called the vorpal sword. It goes "snicker-snack."
What kind of motorcycle does Blade drive?
a cool one its a ducatti is the style of bike blade rides
How to Choose the Right Circular Saw Blade?
No matter what kind of job you need fulfilled, there is one kind of circular saw blade that is perfect for your project. There will always be one kind of saw blade that will give you all of the right cuts and all of the right motions. Do not ruin your project by not selecting the correct saw blade for it. Your saw blade will probably be among a list of the following: a thin-kerf blade, a metal cutting blade, a plastic cutting blade, a flooring blade, a crosscut blade, a combination blade, a masonry blade, a ripping blade, a nail cutting blade, a hollow ground plywood blade, or a hollow ground planer blade.Learn why the different blades are named what they are. Some may seem like they are obvious, though, such as the masonry blade being used to slice through bricks. The flooring blade intends to slice through rough lumber or through flooring. A flooring blade is also capable of cutting through one or two nails, but this is not its purpose.Recognize one special trait about each blade: The more teeth that you see are on each blade, the cleaner the end result will be when you use it to cut. Though they are significantly more expensive than other kinds of blades, a carbide-tipped blade will not often need to be sharpened and has so many teeth that their cuts are always very smooth.You will want a ripping blade if you want to make longer cuts. However, you should not use it with plywood. If you have plywood, get yourself a crosscut blade for the best effects.If you have no real specifics, a combination blade does the best for general purposes. However, the teeth are large and leave a rough looking cut.If you are looking for a smooth miter, you should invest in a hollow ground planer saw blade. However, if you have plywood and you wish to cut it without experiencing splinters, there is a hollow ground plywood to work with.For heavy remodeling, there is always the nail cutter. This is because you might find some hardware, such as nails, in your wood.
What kind of pocket knife did ponyboy have in the outsiders?
well john has a stitoe switchbalde and two it has a butterflly
Are razor blade cuts serious?
what can help razor blade cuts that you do yourself like what kind of medicine or cream do you put on it
Where to buy a razor blade not the kind you shave with?
Hardware store.
What kind of metal is window frames?
Window frames are usually made of aluminum.
What is an adjective to describe a window?
Glass is an Adjective that will describe window. EX: The glass window just broke! <---- Glass is the adjective because it tells what kind of window. What kind of window? The glass window.
