In a 2001 Ford F-250 :
( DOT 3 brake fluid meeting Ford specification ESA-M6C25-A is used in the
brake system )
In the brake master cylinder reservoir on the drivers side of the engine compartment near the firewall
Under the hood on the driver side.
brake pressure loss and pedal going straight to floor is mostly caused by loss of brake fluid or air in brake system look under car and on inside of wheels to see if fluid is leaking. check brake fluid level at master cylander if no fluid seems to be leaking, have the brake system bled for air. this is the simplest remedy to start with if that doesnt fix it have the brake power booster checked to make sure fluis is not leaking into that also check on firewall in engine bay round booster for fluid and on inside of cab on firewall for fluid
( 3 ) according to the owners manual
7.3 Liter Turbo
I have a 1996 f250 with a 5.8 engine. i was wondering if anyone knows how much power a 2001 f250 with a 5.4 egine makes
Sounds like a master cylinder.
I believe that the type of fluid to use is engraved into the automatic transmission fluid level dipstick
The windshield washer fluid tank is on the passenger side of the engine compartment near the battery
Does it have spark, fuel, compression?
There should be a dipstick at the very back of the engine. It should be gray and say transmission.
Remove the tire and wheel. Remove the brake pad Springs. The brake pads and break assembly will come off. Reverse the process to install the new brake pads.