0
What else can I help you with?
Which would be the better choice for driving a screw into a board a long screwdriver with a narrow handle or a short screwdriver with a wide handle?
Long screw driver with a narrow handle would give the most torque, therefor it would be best It would also depend on the blade of the screw driver. The blade should fit well into the slot in the screw so if the long screw driver with the narrow handle had a small narrow blade that was too small for the screw then another one would be better.
Would a long screwdriver with a narrow handle or a short screwdriver with a wide handle be the better choice for driving a screw into a board?
i think a screw into a board a long screwdriver with a narrow handle
Is a screw driver a force multiplier?
Force multiplier. It an inclined plane so a smaller force is acting over a greater distance
Where can you get the screw for the 2008 Honda accord keyless enter remote?
I would try a clock repair shop.
How do you repair an Oneida table knife which has come apart into blade and handle pieces?
If the blade has a section that slides into the handle, I would use a 2 part epoxy glue on it. Instruction with the glue. If it has broken clean where the blade meets the handle, there is really not much that can be done. It can be welded, but it would always show the repair.
What should I know to start a home repair business?
I would like to start my own home repair business. What basics should I know before I begin the process?
Where can I find information on the prerequisites for starting a home repair business?
I would like to start a home repair business, but I am worried about licensing. Where can I read about what I need to do prior to opening my company?
What are some of the documentation needs of small business owners?
For starters a business plan. Documentations needed for any business would be the description of the business, meaning what would be going on throughout the business. How would it be handle. What type of qualifications may be needed to handle the job. When you say small, how small, 1-20 people or 100+ but 300 or less. What will be sold at this business if selling anything? What type of business, Doctors, Lawyers private practice, small business, etc...
What is the cost of obtaining A++ computer repair certification?
I would like to start a computer repair business. How much does it cost to get an A++ certification? Is the test expensive?
What training do I need to repair appliances?
It's not mandatory to have training in appliance repair to start a company, but it would definitely help. You can find out by looking up the SBA(Small Business Association) guidelines. Business experience or training would also be a plus.
How would you replace an inside driver's door handle in a 1996 Honda Accord LX?
hey sup? well the nandle is held a screw which is cover by a circular cap ( if still there) remove cap with a small flat ( - )head screw driver , then use a phillip ( + ) to remove the screw... then slide forward the handle to un-hook the handle from the door shell... loose the clips from the 2 metal rods and disconnect the power lock .......instalation is the same thing but reverse.....
Why would you consider incorporating for a successful bicycle repair business?
to raise more money easily
