0
Would a long screwdriver with a narrow handle or a short screwdriver with a wide handle be the better choice for driving a screw into a board?
i think a screw into a board a long screwdriver with a narrow handle
What else can I help you with?
Which would be the better choice for driving a screw into a board a long screwdriver with a narrow handle or a short screwdriver with a wide handle?
Long screw driver with a narrow handle would give the most torque, therefor it would be best It would also depend on the blade of the screw driver. The blade should fit well into the slot in the screw so if the long screw driver with the narrow handle had a small narrow blade that was too small for the screw then another one would be better.
Which is better for prying open a stuck cover from a pan of paint- thick screwdriver or long handled screwdriver?
The wider the screwdriver, the better. Longer handle will give a fling affect possibly resulting in thrown paint splatter.ANS 2 - Why not do the sensible thing and just get a paint can opening handle, available for less than a dollar at every paint store and hardware store.
Which is better a long screwdriver with a narrow handle or a short screwdriver with a wide handle?
1. A Long screw driver with a narrow handle would be better. Depending on the blade size, if the blade was smaller that would work better.ANS 2 - They both have particular uses, and both belong in a properly equipped tool box.
Why would you choose a bigger handle of a screwdriver?
Because your hand can get a better grip and exert more torque or pressure.
What is the bottom of a screwdriver called?
There is the tip and the handle, I don't understand 'bottom' in a screwdriver.
Is a screwdriver handle magnetic?
Some are and many are not.
What is the best outlet screwdriver for electrical work?
The best screwdriver for electrical work is a insulated screwdriver with a rubberized handle to prevent electric shock.
Which would provide a greater mechanical advantage -a screwdriver with a 5cm handle and a 1cm shaft or a screwdriver with a 3cm handle and 1cm shaft?
The mechanical advantage of a screwdriver is determined by the ratio of the length of the handle to the length of the shaft. For the 5 cm handle and 1 cm shaft, the mechanical advantage is 5:1, while the 3 cm handle with a 1 cm shaft has a mechanical advantage of 3:1. Therefore, the screwdriver with the 5 cm handle provides a greater mechanical advantage.
What is the effort arm of a screwdriver prying of the lid of a paint can?
the effort is where u put work into the screwdriver- the handle.
What is a long reach screwdriver?
Every screwdriver has a handle. You hold the handle and turn it to tighten or loosen a screw. Sometimes your screw might be in a tight place that your hand can't get to such as inside of a car hood. You use a long reach screwdriver because the shaft above the handle is larger than a typical screwdriver. A typical screwdriver shaft is about 5 inches. A long reach screwdriver is bigger. Maybe 12 inches or 2 feet long. It's just a long screwdriver. I can't believe you would as this question
Why do screwdriver has a plastic or wooden handle?
It's cheaper and lighter than a metal handle would be.
What materials are used to make a Phillips screwdriver?
A phillips screwdriver is generally made of a steel shaft with a plastic handle
