VGA, a computer video output, cannot be converted to a composite (1 video wire) or component video (3 video wires) signal with just a cable. VGA can be much higher resolution than composite video. You will need a scan converter box to create the NTSC video signal.
If your tv has RCA out, use that. If not, you could use an external digital cable tuner and connect that to your soundbar .
A 3.5 mm input is a line level signal, and a turntable has a phono level signal. You can connect these, but you will need a phono preamp to go in between the two. An RCA cable plugs into to the preamp from the turntable, and an RCA to 3.5mm cable connects the preamp to the stereo.
The purpose of an RCA cable or connector is to carry audio. It has a red connector for the right stereo channel and a white or black connector for the left stereo channel. One example of how an RCA audio cable could be used is to connect a CD player to other stereo equipment.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
For most home theater setups, all you really need is an RCA cable to connect your TV to the stereo receiver.
To connect an RCA cable to an XLR cable, you must solder links one and three from the XLR together, and connect those two wires to the end of the RCA component, along with the second wire. It is very useful to use a diagram to make sure you connect the correct cables.
a mini (1/8") cable can be a y-cable, particularly if it is used to connect a 1/8" stereo connector (like an iPod) to a RCA stereo cable. The 1/8" stereo plug must split (Y) to the left and right RCA in order to connect in stereo.
1.for video composite cable yellow use rca male to rca male video cable. or component (recommended if tv has this input) 3 pairs of rca male to rca male video called rgb cable. 2. for audio out use pair of rca male to rca male cable.
Typical coax cable uses a different standard than RCA. You will need to use a converter box.
No.
If your tv has RCA out, use that. If not, you could use an external digital cable tuner and connect that to your soundbar .
No. You would need a coaxial (preferably video) cable to connect a cable box to a VCR, unless your cable box has RCA outputs, which most don't.
A VGA to RCA cable allows you to connect components such as a laptop to a television. These two components are not necessarily built ready to connect so a VGA to RCA cable allows for the signal version without a converter.
It depends on what you want to connect to it. RCA - RCA or RCA - SCART or S-Video cable (not used that often any more)
you need vga to rca cable
via something like this: Composite and Y/C (S-Video) to VGA Monitor Converterhttp://www.allthings.com.au/Catalogue/Monitors/vid%20to%20vga%20plus.htm
A 3.5 mm input is a line level signal, and a turntable has a phono level signal. You can connect these, but you will need a phono preamp to go in between the two. An RCA cable plugs into to the preamp from the turntable, and an RCA to 3.5mm cable connects the preamp to the stereo.