iron rush
An 8V engines, is a 4 cylinder engine with two valves per cylinder. A 16V engine has 4 valves per cylinder. More valves is like having bigger lungs, it will make more horsepower out of the same size engine.
The year, make, model and engine info needed.
yes.
No , the 2.4 liter - 4 cylinder engine in a 2003 PT Cruiser is not an interference engine , according to the Gates website ( they make timing belts etc . ) While the valves will not hit the pistons, I have seen intake valves hit exhaust valves a n d bend that way.
When your valves do not have clearance, a number of things may happen. Your valves will not be closing all the way, you can lose horsepower/compression, poor fuel economy, backfires, hesitation, stumble when idle or take off, it will make your engine run like crap! When you lose clearance on the valves, the engine almost acts like it is out of timing. When the valves have excessive clearance, they will be noisy.
You can adjust the valves, on your Caterpillar 3406 diesel engine, by turning the engine to the number one spot. Adjust the number one valve with the adjustment screw. Move to the number two spot and so on.
If valves are leaking you should have an automotive machine shop inspect and/or repair cylinder head(s) and find the cause of the problem. The machine shop can cut the valve seats to make a seal (valves, keepers,retainers may need replacement), there is no material that can be added. Also ensure the engine block is true before having work done to cylinder heads.
you can but it will only damage your valves and make short life of your engine
The H22 engine, which are found in 1997 Honda Preludes, are interference engines. This means that the valves and pistons do indeed make contact as the engine is on.
Sperm
Bandana
The nucleic acids DNA and RNA make up genetic material.