0
If valves are leaking you should have an automotive machine shop inspect and/or repair cylinder head(s) and find the cause of the problem. The machine shop can cut the valve seats to make a seal (valves, keepers,retainers may need replacement), there is no material that can be added. Also ensure the engine block is true before having work done to cylinder heads.
What else can I help you with?
What is valve repair?
A valve job is where they turn or resurface the valves in your cylinder head to promote sealing. The head(s) have to come off & they grind the seats as well. The cam opens/closes the valves to let in fuel/let out exhaust.
Is the intake or exhaust valve located in the cylinder head on a overhead valve engine?
Type your answer here... They are in the cylinder head.
Where is the coil on a 1998 Chrysler cirrus?
Six cylinder, it is a non serviceable component of the distributor.Four cylinder, it is on top of the valve cover.Six cylinder, it is a non serviceable component of the distributor.Four cylinder, it is on top of the valve cover.
Where is the coil located on a 1998 Chrysler Sebring?
Four cylinder, on top of the valve cover. Six cylinder, it is built inside the distributor.Four cylinder, on top of the valve cover. Six cylinder, it is built inside the distributor.
Ford brake proportioning valve?
The brake valve is located next to the master brake cylinder. The valve can be found just below the master brake cylinder.
What keeps valves against their seats?
The valve springs.
Which is more efficient 4 valves per cylinder or 3 valves per cylinder?
2 valve per cylinder Ex fiat 1.2l 8 valve
Where is the egr valve located on a 1990 Mazda mpv 6 cylinder?
There is no egr valve on a 1990 Mazda MPV 6 cylinder
What is the purpose of valve ports?
The purpose of Valve Ports is to let exhaust gases out of the cylinder and to let air and fuel mixture into the cylinder!
How does the valve reservoir and pump function on a hydraulic cylinder jack?
the pump supply's the pressure, the resivoir supply's the fluid, the valve dirercts the fluid into the cylinder, to extend or retract the cylinder.
How do you open the tank valve on an oxygen cylinder?
To open the tank valve on an oxygen cylinder, make sure the regulator is attached securely. Slowly turn the valve counterclockwise until it is fully open. Always open the valve slowly to prevent damage to the regulator or sudden release of high-pressure gas.
Where is pcv valve on 1991 Toyota Camry?
4 cylinder does not have pcv valve.
