Want this question answered?
Actually phase modulation was used for the color signal in all analog TV systems.Phase modulation, with some signal preprocessing, was used to indirectly get frequency modulation in many FM transmitters.Certain modems use phase amplitude modulation.etc.
Regenerative Repeater is used for the PCM (Pulse code modulation ) it amplifies the signal because the effect of the channel over the signal .
When modulated with a radio frequency signal, they will indeed carry information. As in fibre-optic cables. The modulation may be of the several commonly used types, amplitude, frequency, phase ... modulation.
yes of course
FM provides noise immunity, whereas AM is easily affected by noise. With FM, the amplitude of the sound is converted into a shift in frequency. So the volume is limited by the bandwidth, but the frequency of the sound can vary as much as it likes, giving a higher fidelity sound. Spikes induced on the signal usually affect the amplitude of the signal. The amplitude of an FM signal is not used in the demodulation process and is therefore immune to spikes in the signal. AM was first used in radio because it is very easy to achieve using basic components. A single rectifier only, is needed to recover the audio. FM is quite a complicated process and could only be achieved once electronics had progressed.
Actually phase modulation was used for the color signal in all analog TV systems.Phase modulation, with some signal preprocessing, was used to indirectly get frequency modulation in many FM transmitters.Certain modems use phase amplitude modulation.etc.
Actually phase modulation was used for the color signal in all analog TV systems.Phase modulation, with some signal preprocessing, was used to indirectly get frequency modulation in many FM transmitters.Certain modems use phase amplitude modulation.etc.
Amplitude Modulation (AM) is used for the picture portion of a television transmission while Frequency Modulation (FM) is used for the audio portion.
Source modulation is employed to distinguish between atomic absorption (an ac signal) and flame emission (a dc signal).
Regenerative Repeater is used for the PCM (Pulse code modulation ) it amplifies the signal because the effect of the channel over the signal .
Frequency ModulationFM broadcasting is a broadcast technology invented by Edwin Armstrong that used Frequency Modulation (FM) to provide high fidelity sound over broadcast radioFrequency Modulated and Amplitude Modulation :) The way a signal is transmitted.
When modulated with a radio frequency signal, they will indeed carry information. As in fibre-optic cables. The modulation may be of the several commonly used types, amplitude, frequency, phase ... modulation.
yes of course
Tone modulation through of modulating a carrier frequency using the charactoristics of a sound, its the method used for telephone
Analog modulationIn analog modulation, the modulation is applied continuously in response to the analog information signal.Common analog modulation techniques are:Amplitude modulation (AM) (here the amplitude of the modulated signal is varied) Double-sideband modulation (DSB) Double-sideband modulation with unsuppressed carrier (DSB-WC) (used on the AM radio broadcasting band)Double-sideband suppressed-carrier transmission (DSB-SC)Double-sideband reduced carrier transmission (DSB-RC)Single-sideband modulation (SSB, or SSB-AM), SSB with carrier (SSB-WC)SSB suppressed carrier modulation (SSB-SC)Vestigial sideband modulation (VSB, or VSB-AM)Quadrature amplitude modulation (QAM)Angle modulation Frequency modulation (FM) (here the frequency of the modulated signal is varied)Phase modulation (PM) (here the phase shift of the modulated signal is varied)
FM provides noise immunity, whereas AM is easily affected by noise. With FM, the amplitude of the sound is converted into a shift in frequency. So the volume is limited by the bandwidth, but the frequency of the sound can vary as much as it likes, giving a higher fidelity sound. Spikes induced on the signal usually affect the amplitude of the signal. The amplitude of an FM signal is not used in the demodulation process and is therefore immune to spikes in the signal. AM was first used in radio because it is very easy to achieve using basic components. A single rectifier only, is needed to recover the audio. FM is quite a complicated process and could only be achieved once electronics had progressed.
Sound.More informationAfter a modulated carrier signal has been received through the radio's aerial, the radio de-modulates it to release the live sound as picked-up from microphones in the radio studio (or was taken from recordings), which was then used to modulate the carrier signal at the transmitter.De-modulation that is done by a radio receiver can be described very simply as "removing the carrier signal to produce the sound".