0
Brazing isn't welding - it's more like soldering. You use a rod made out of brass for the process of brazing.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is the use of oxidizing flame?
An oxidizing flame is used in Braze welding. Not to be confused with Brazing, Braze welding uses bronze filler rod in a similar manner to fusion welding.
What tig rod to use welding ASTM A606?
what kind of tig to use for 606 steel
What does 7016 stand for on a welding rod?
for steel structure building can i use: -size 2.5mm of 7016 welding rod as a filler for welding IPE240 to plates -size 2.5mm of 7016 welding rod as 2nd pass
What is the wcb material equaland welding rod grade?
its 7018 grade rod can use
How do you weld cast iron with an oxy acetylene torch with a cast iron rod?
I am not aware of a cast iron rod for oxy acetylene welding, I am for arc welding, For cast, I use a brazing rod, a brass or copper alloy, but what do I know. If there is a cast rod available, it would be the same process, get the cast you are welding hot almost to the point of melting, bring in the rod, heat it at the same place and bring both to a melting point. Work from that point along the crack or joint you are welding. ----------------------------------------------------------------------------------------------------------------- You need not use brazing rod for case iron welding. You get arc welding electrodes for cast iron. Use appropriate grade of rod for your case iron under welding.
Which type of welding rod is use in 6G welding?
7018 structural 6010 root, 7018 cover for pipe
What welding rods would you use to weld en24 and would you need to pre heat the steel?
en 24 grade which welding rod use?
How do use braze cast iron?
yes it can although it is not reccomended, if this is your only option preheat the cast iron to almost cherry red and weld with a low hydrogen rod such as 7018
What welding rod is use in welding of manganese and carbon steel?
Carbon Steel E6015 Manganese Alloy Steel E8018-C3
How do you find TDC on number one cylinder?
Use a welding rod or similar screw out spark plug put welding rod inside were the plug was and turn over the engine by hand until the rod reaches the top you are now at tdc
Why use flux when soldering copper tube?
To prevent oxidation and allow the alloy to flow into the fitting capillary action (attraction) and it is best to use a non acid flux and if one knows how to braze they can braze joints with a tensile strength of 87,000 PSI without the use of flux PROVIDING you use the correct rod as per AWS
Can you weld steel to stainless steel?
Yep, you can weld steel to stainless and you can weld stainless to steel. You can use steel or stainless welding rod in either case but the steel or steel welding rod will of course rust.
