0
What kind of rotor is most suitable for turbo alternators which are designed to run at high speed?
Wiki User
∙ 10y ago
Smooth cylindrical type
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What are the Types of alternators based on rotor construction?
Types of rotor-Salient pole or projected typeNon salient pole or cylindrical typeSalient type is used for low speed or medium speed motor where non salient type is used for high speed rotor.
What happen to the rotor speed and rotor current when the mechanical load on an induction motor increases?
rotor speed will decrease....the rotor current wil increase.....
What happens to the rotor speed and rotor current when the mechanical load on an induction motor increases?
rotor speed will decrease....the rotor current wil increase.....
What determines electrical supply frequency?
The speed of the alternators and the magnitude of the load.
When induction motor is switched on the rotor frequency is?
The induction motor rotor has different frequency compared to it's stator. The rotor has slip ( s ) frequency. slip = ( Synchronous speed - rotor speed ) / Synchronous speed Synchronous speed = ( 120 * f ) / P where f = supply frequency to the stator. p = no of poles rotor speed is the actual speed the motor is running. Frequency in the rotor = slip * frequency in the stator At starting rotor speed is zero, so slip is one. Let us take the supply frequency is 50 Hz, then rotor frequency is also 50 Hz at starting. The motor attains speed and runs with its full speed at a point of time. Then let us take the slip is 0.04 then the rotor frequency will be 2 Hz.
What is a rotor hub?
Rotor hub links the blades to the low-speed shaft
What is the torque speed characteristic?
the ratio of the relative speed of stator magnetic field with the speed of rotor, to the speed of rotor is defined as slip. where as in torque slip characteristic is the graph between the speed of the rotor and the torque experienced on the rotor. in the case of induction motor, the torque decreases with the increase in the rotors speed. while in the case of sychronous motor, its different (you check out, because i just forgot about it!! keep smiling!
What happens if the relative speed between the rotating flux of stator and rotor of the induction motor is zero?
if the relative speed of magnetic flux of stator and rotor becomes zero there will be no back emf and eventually the rotor gets zero speed
What is meant by salient and non-salient pole machine?
for salient type motor Lq>Ld, and non-salient type motor Lq=Ld; Lq and Ld are q-d axis inductanceAnswer'Salient' means to 'stick out', so a 'salient pole' machine is one whose rotor windings are fitted to pole pieces that stick out from the rotor shaft. A 'non-salient pole' machine is one in which the windings are placed in slots machined along the length of the rotor.Salient pole machines run slower and have more poles than slotted-rotor machines, and are typically used in alternators run by water turbines; slotted-rotor machines are typically used in alternators run by high-speed steam/gas turbines.
Why do helicopters fly so slow?
What is the limiting factor for helicopter speed you ask? What happens to the rotor as the velocity of the helicopter increases? The relative speed of the tips of the rotors changes because of the wind speed. On the advancing side of the rotor the speed increases by the speed of the helicopter. On the retreating side of the rotor the speed decreases by the speed of the rotor. One of two things happens as the helicopter reaches a high speed: A: If it is a large rotor, the advancing blade will reach the sound barrier and sap energy from the rotor, slowing it. Significant damage may occur to the helicopter. B: If it is a smaller rotor, the retreating blade will slow to the point where stall occurs, and the helicopter will be forced into a turn while losing altitude and decreasing speed, then it will usually recover if altitude permits. Option B can be mitigated by increasing rotor RPM at higher speeds. In this case the rotor speed becomes the limiting factor, as the centrifugal forces at the root of the blade are quite incredible. Carter
How can vary the induced voltage in rotor?
You can vary the induced voltage by varing the speed of the rotor.
What happens to the rotor speed and rotor current when the mechanical load on an induction motor increase?
whenever the load increases,the current drawn by the motor to do or to fulfill the required energy to the load. so the current will increase generally.Increase in load will cause the full utilization of motor,so speed of rotor will decrease.
