Layer 2 data link layer
It handles Error Recovery, flow control (synchronization) and seqencing (which terminals are send and which are receiving).It is Considered the "Media access control layer"and is where MAC Addressing is defined.Answer:Data Link Layer
Yes it is
The question is a little vague, but a media access control (MAC) address is an address assigned to network interface devices such as an Ethernet card or wireless card. The addresses are assigned by the manufacturer and no two cards share the same number; each must be unique.
It called Media Access Control (MAC) layer address
No, frame delimiting is a primary responsibility of the Logical Link Control sublayer of the Data Link Layer.. Data link layer exists of 2 sublayers; Media Acces control Sublayer (MAC) & Logical Link Control sublayer (LLC)
With regard to the TCP/IP Network Model, the network access Layer is the lowest logical layer in the model and provides specifications for how data (bits) should move over the network.
Logical link control sublayer and media access control sublayer
Answer = ARPMeaning of ARP - "Address Resolution Protocol", is used to map IP Network addresses to the hardware (Media Access Control sub layer) addresses used by the data link protocol. The ARP protocol operates between the network layer and the data link layer in the Open System Interconnection (OSI) model.
Media Access Control address (MAC address) is a unique identifier assigned to most network adapters or network interface cards (NICs) by the manufacturer for identification, and used in the Media Access Control protocol sub-layer.
Network Layer This layer addresses the data. It adds an IP address which allows our data to flow across networks. The protocols involved in this layer are IP and IPX. Data Link Layer This layer provides the functional and procedural means to transfer data. It also corrects any errors that may occur in the Physical layer. The protocols used at this layer are media access control and logical link control.
physical addressing media access control
Data Link Layer