answersLogoWhite

0

A Stud is one which will have thread throughout the structure. So it will require a nut on both the sides. Whereas a bolt will have thread at only one side of its structure where a nut is required and on the other side will be the head.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Which is stronger bolt or stud?

in some cases you have to use a bolt but a stud is sronger


What is the different between stud bolts and hex bolts?

Typically, a stud bolt refers to an un-headed fastener, like a piece of all thread rod. A hex bolt is common a six-sided fastener, available in many grades.


Will your 92 f 150 rims fit on your 05 for escape?

No, completely different bolt patters and stud size.


What is difference between Stud and stud bolt?

stud has all its length threaded and it is used with two nuts, but the bolt has one end closed and the other end is threaded ,it is used with a single nut.


Will a 93 Chevy Suburban 5 bolt rim fit on a 2000 Chevy Monte Carlo?

NO it will not. The stud pattern is different.


What is a bolt without a nut called?

A bolt without a nut or a head is called a stud.


What is the difference between stud bolt and machine bolt?

Stud bolts are the ones with no head, only the bolt itself you can fast'em with vise grips or with nuts. Machine bolts are the ones that you need a wrench to fast it(you put the wrench in the head).


What is your bolt pattern on your 2000 impala?

5X115 with 12X1.5 stud.....


What is the bolt pattern on a Corvette?

all corvettes run a 5x120.7 bolt pattern 68-82 used a 7/16 stud Low offset 84-89 12mm stud Med offset 90-current 12mm stud High offset


How do you tighten a stud bolt?

thread 2 nuts on the stud. thighten them against each other. with a wrench on the top one tighten the stud and then loosen the nuts and remove them.


Why does a 1969 dodge slant six spray oil from the front exhaust manifold bolt hole?

There should be a stud (not a bolt) threaded in to the head and the stud should have a thread sealant applied to the threads.


What is a 2008 Subaru Outback bolt pattern?

Bolt Pattern: 5X100; Stud: 12mmX1.25; Center Bore: 56.1.....