once you have the bellhousing,any gm trans will bolt up. camaro and firebird trans will require special crossmember.they mount at an angle.
no
most Chevy trannys made for small blocks will bolt some additional information .... Chevy never made a 305 with a 4 bold main only 2 bolt main
a 700r4 trans out of a s10 with a 4.3 will bolt up to a 305 but you will have to use flywheel cover for the s10 trans.
The schematic for an 83 Chevy 305 engine can be found in the service manual. It gives the location of each component and how everything is connected.
One of the easiest but to do it right , get a manual on your car.
Yes IF the original engine in the rs was a 305. rs v6's and v8's have different trannys.
That tranny will be a th350 or a th200R4 and both of those trannys will bolt up to a 305.
pick up a chiltons repair manual from the library for your car.
If the Buick 305 is really a Chevy 305, then the motor mounts will interchange with a Chevy 350.
There is a test procedure for that using an ohm meter. Consult a Chilton's or similar repair manual.
It should, most Camaros had the TH700R4 trannys. None the less the transmissions would be interchangeable anyway.
An autimatic transmission will have a 4 speed transmission and a manual transmission will have a 5 speed transmission.