answersLogoWhite
Auto Parts and Repairs
Dodge Caravan
Dodge Dakota
Dodge Durango

What might cause a 1993 Mazda mpv to overheat?

272829

Top Answer
User Avatar
Wiki User
Answered
2007-05-11 00:18:53
2007-05-11 00:18:53

Low coolant Bad radiator cap Dirty or plugged radiator Thermostat cooling fan not working Water pump Collapsing hoses

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


have you flushed your radiator or changed the thermostat it could be stuck


Needs coolant and/or needs to be put back in timing/slack belt/deffective water pump.




mine slipped on the timing belt itself so check the timing first then work the fuses and then use a tachometer on the ignition coil if not it you might have a fried motor man


I have a 1993 Mazda Protege LX and I was told that there is no relay for the horn, there is a horn switch inside your steering wheel. that might help


Bad/loose fan belt, bad thermostat, low coolant level, plugged/bad radiator, maybe water pump is out.


No, the 1993 Mazda Protege DX does not have an airbag. The vehicle does have a passive restraints system and is extremely reliable.





Its prob the radiator fan. Or you are out of coolant.


you will have to get from Mazda or buy a used one



It is important to know where the parts are within a car. The horn relay in a 1993 Mazda Protege is found in the cars fuse box.


most parts are yes. most parts are also interchangeable for ford probes of the same year range (excluding body parts of course --- Many interchangeable parts on 1993 Mazda Mx6: 1993-1996 Mazda 626 1993-1996 Ford Probe some parts off the Mazda MX3 some parts off the 1998-2003 Mazda Protege some parts with 1996 are not compatible due to OBDII legislature, which changed emissions and other changes.


The fuel pump is located in the fuel tank and is cooled by the fuel. If you ran out of gas it could cause the fuel pump to overheat and burn out.


not likely as the heater fan only controls the air in the cabin, maybe the radiator fan has gone out too?


Mazda has a recall on their seatbelts for some models for this reason. ask a Mazda dealer if your model has the seatbelt recall. I believe the 92 mx3 has a recall for the auto seatbelts, but i am not sure about 93. Look into it though and they might fix it for free!


The error code 68, on a 1993 Mazda, is a reference to a computer problem. The problem should be addressed by a certified mechanic.


The 1993 Mazda the inertia?æswitch can be found on the firewall in the engine compartment. The inertia switch will be on the passenger side of the firewall.


I have a Mazda 929 (1993) I had the same problem last year...I got a new alternator, and some new wires and spark plugs. Haven't had a problem with it since.


i am sry to tell you that the arm Mazda 323 1993 cost $40,000 to repair but u ain't lucky cuz the arm Mazda 324 1994 cost $1 to repair


Mazda removed the turbocharged 4 cylinder MX-6 engine (FT2 2.2L) in 1992. No model 1993+ came with a stock turbocharger.


A 1993 Mazda MX-3 does not have an inertia switch. If anything is wrong with what would normally be the inertia switch, the fuel pump may be faulty.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.