0
What mineral is used for tools machinery light bulb filaments and steel girders?
Wiki User
∙ 9y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Is the brightness of a light bulb determined by its filaments?
Though there is a bit more to the story than this, yes, it is generally true that the brightness of a light bulb, sometimes called a lamp, is a function of its filaments. For a given voltage of operation, a less resistive filament will draw more current, run hotter and will glow more brightly (be more incandescent). A heavier, more resistive filament will draw less current, get less hot, and not produce as much light (be less incandescent). The former will run "hotter" as well as brighter, and the filament won't last as long, though it will be more efficient. The latter will not be quite as bright or as efficient, but the filament will have a longer operating life, and will probably be more shock resistant. Lamp filaments are usually made of tungsten, and these filaments are coiled to reduce evaporation of the metal when that metal is white hot. There is a "balance" engineered into the lamp to make it run "hotter" and more brightly to be more efficient, yet limit current somewhat, limit filament evaporation and extend the life of the lamp. Eventually, enough of the filament evaporates away in normal operation to create a "hot spot" that quickly degrades, and the filament fails. A link can be found below to learn more.
What is the chemical or liquid inside a compass?
compasses have Mineral Oil filled Needle Housings, with steel needles that pivot on a sapphire bearing The light mineral oil is there to damp the needle (stop the needle swinging too loosely) and it has to withstand freezing (because compasses are used in cold places).
What is the principle of electric tube light?
The way an electric tube, or fluorescent, light works is really very interesting. Most "regular" light bulbs are incandescent. Their source of light is the glow of electricity passing through a very thin wire known as a filament that is suspended in a vacuum. It glows with a "warm" color in the yellow/orange range. With a fluorescent tube there are two filaments, but they do not directly provide the light source, and a mercury vapor instead of a vacuum.On each end of a long glass tube are coils using electricity regulated by a ballast. The tube is filled with mercury vapor and phosphor. The electricity passing through the filaments excites the mercury vapor causing it to glow with ultraviolet (black) light. Ultraviolet light is not visible, but it does cause cause certain chemicals and colors to glow or fluoresce. If you take laundry detergent with phosphorous in it, for example, and place it under an ultraviolet (black) light, the phosphorus glows cold white. So by adding Phosphorus to the tube of Mercury vapor it will also glow when the vapor is excited electrically.The result is a lot of light for a much lower amount of electricity, and excess heat. The color temperature is very close to that of daylight but a little cooler, in the blue/green range. That makes growing plants under fluorescent light more effective also. The negatives are that most "tube lights" can not be dimmed with a wall dimmer-switch, and the ballasts, that controls electrical flow, do have a tendency to burn out or fail after a time.
What is the use of starter in tube light?
Tube light requires two things to function . Very high starting voltage , and high voltage to continue the operation . The starter is a circuit which breaks at regular intervals . When you break a circuit and start again , high voltage spark takes place . This voltage is further amplified through the choke which is a transformer . Thus at the beginning the starter gives high voltage sparks . Due to this the current begins to flow through the tube and the tube begins to glow. Once the tube starts , the required voltage to sustain is quite low , which is provided by the choke .If the starter is bad the tube does not start . If the choke is bad or if the gas is low , the tube does not sustain its light .Fluorescent starters are used in several types of fluorescent lights. The starter is there to help the lamp light. When voltage is applied to the fluorescent lamp, here's what happens:The starter (which is simply a timed switch) allows current to flow through the filaments at the ends of the tube.The current causes the starter's contacts to heat up and open, thus interrupting the flow of current. The tube lights.Since the lighted fluorescent tube has a low resistance, the ballast now serves as a current limiter.When you turn on a fluorescent tube, the starter is a closed switch. The filaments at the ends of the tube are heated by electricity, and they create a cloud of electrons inside the tube. The fluorescent starter is a time-delay switch that opens after a second or two. When it opens, the voltage across the tube allows a stream of electrons to flow across the tube and ionize the mercury vapor.Without the starter, a steady stream of electrons is never created between the two filaments, and the lamp flickers. Without the ballast, the arc is a short circuit between the filaments, and this short circuit contains a lot of current. The current either vaporizes the filaments or causes the bulb to explode.
What is the Function of light bulb in an electric circuit?
The function of a light bulb in an electric circuit is that it turns electrical energy into light.
What mineral is used in tools and machinery?
The answer is iron. It is used to make steel for tools,machinery,and light-blub filsments. +++ Not the light-bulb filaments. They are made from tungsten.
What do metals and machinery the metal filament in a light bulb and steel girders used to frame an office building all have in common?
all are metals and condutors
What do metal tools an machinery the metal filament in a light bulb and steel girders used to frame an office building have in common?
They began as minerals inside earths crust
What do metal tools and machinery the metal filament in a light bulb and steel girders used to frame an office building all have in common?
They began as minerals inside Earth's crust
What is always in light bulb filaments?
Tungsten is always in light bulb filaments :)
What metal use the filaments in light bulbs?
Tungsten is used in filaments of light bulbs.
What is the use for tungsten?
Light bulb filaments.
The element used in light bulbs filaments?
Tungsten
What element makes light bulb filaments?
Tungsten
Which element is used in the filaments of household light bulbs?
usually tungsten
What element makes up the filaments in light bulbs?
It is usually Tungsten.
Why is tungsten metal used in filaments of light bubls?
It is a part of a bulb
