Single phase induction motor ( usually capacitor- start type)
Single phase induction motor ( usually capacitor- start type)
230V/1Ph/50Hz 1HP (0.75 kW)Motor Capacitor start induction motor ( single phase)
The backing plate on a lathe is used to mount the chuck to it and is the adapter to the lathe spindle.
A lathe that measures 6 inches from the center of the spindle to the closest part of the bed is considered a lathe with a 12 inch swing.
Obama
knurling
Spindle Motors are V3 class low vibration 3 phase induction AC motor. Spindle motor has extra low vibration performance. They are specifically designed for grinding machines and low vibration applications
The spindle of a lathe is a rotating hollow tube within, and protruding the head stock and to which a chuck, drive plate or facing plate attaches and rotates to enable machining. It is housed within the head stock in bearings and has some gears around it which is driven by other gears which in turn is driven by an electrical motor.
There are various ways for a lathe to hold its workpiece.The workpiece could be held between centers from the spindle and tail stockIt could be gripped in a chuckA faceplate could be used and the workpiece is screwed, bolted or clamped to it.
No, thank you.
Stepper motor
Using a drive plate on a lathe requires removing the chuck and the drive plate is attached in its place onto the spindle.