Use TCW-3 two-cycle oil. If your motor doesn't have oil injection, mix the oil with your gas at a ratio recommended by the manufacturer. If it's 50:1, mix a pint of oil per 6 gallons. 100:1, mix a half pint per 6 gallons, and so on.
I use 80 weight gear oil.
There is no difference in 4 stroke and 2 stroke oil, except that 2 stroke uses non-detergent oil. 2 stroke oil is actually 30 weight non-detergent (30wt ND) oil. Oil with detergents will leave deposits in 2 stroke cylinders, and is not recommended.
The motor oil to use in a 1982 Yamaha 250 XT 4-stroke dirt bike is a 10-30 or 10-40 weight oil. Castrol GTX Motor Oil that is of this weight is the best oil to use in off road bikes, because it is a cleaner oil. It will not gum up the works of smaller engines like regular motor oil.
No difference. Automobile motor oil is 4 stroke oil just like the oil you use in a 4 stroke ATV. Just purchase the correct weight of any name brand. I recommend you use 100% Synthetic in any air cooled engine.
Any motorcycle oil with the weight 20W50. I use Valvoline 4 stroke motorcycle oil 20W50 and it works fine!
if your scooter has a engine oil dip stick then it is a four stroke. if it has a oil tank that you have to put oil in then it is 2 stroke.
no
With a 2 stroke engine, you mix the oil with the gas. With a 4 stroke engine, there are separate tanks for the oil, and the gas.
4 stroke fuel is straight petrol, it does not have oil in it! If you use it in a 2 stroke engine you will seize the motor. 2 stroke fuel has oil added to it.
Probably however the oil is usually only in the petrol with a two stroke motor.
2 stroke how many onces of oil mix with fulel 2 stroke
NO! definitely a 2 stroke and requires oil in gas.