Want this question answered?
i found that the t190 uses hydrostatic hyd oil further research found that transmission fluids are hydrostatic which means you can use either a tractor trans oil or even a torque oil 50 also high temp hyd 100 is also used
Hydraulic Reservoir 4.8 gal Hydraulic System 8.5 gal Chaincase Reservoir 9 gal
where is the drain plug for hydraulic fluid on 743 bobcat
According to the specs manual here, it's 9.5 quarts WITH filter.
Hydraulic fluid and hydraulic oil are one in the same.
jesus
through the filter
The Bobcat 753 has a 14 quart hydraulic reservoir capacity, and the overall system holds 6 gallons.
The motor oil capacity of a Bobcat 763 skid steer is four quarts. The Bobcat 763 skid steer hydraulic oil capacity is three gallons.
14 quarts
emolliating hydraulic oil in the lowest part of the hydraulic system.
Use Bobcat (Orange) Hydraulic Oil. If you don't have access to this use hydraulic ISO 46 for temps of -40 to 80f. Use ISO 100 for +40 to 120f. 10w30 motor oil will also work in a pinch but try not to mix....go back to hydraulic at next change.