Kubota UDT oil or can use Case IH HY trans ultra.
in the uk its recommended to use 15w40
what hydraulic oil to use on Kubota L39
Oil filter part number is 121965 Or you could use the longer and more common Fram PH8A (common on Fords) or equivelant.
Fram does not have a filter that will cross-over. Baldwin filters cross over for HHTA0-59900 would be a BT9358. I would recommend NOT using Fram filters on your Kubota. Use Kubota, Wix or Baldwin filters.
No, there is no special filter. Use the same filter you would with conventional oil.
SAE 10w30 any major brand. I recommend you use a 100% synthetic oil.
The oil filter is located under the car just to the right of the oil pan. You should use an oil filter wrench to remove the filter.
No, the oil filter only filters the oil of any contaminates. If your engine is buying oil it has worn internal parts and no matter what filter you use it will continue to use oil.
Change the filter every time you change the oil. I recommend you change your oil/filter every 5,000 miles if you use conventional oil or every 7,500 if you use synthetic.
The FOX M6, DAEWOO and OPE cars use the X93 oil filter.
If you are referring to an oil filter, then you can use any oil filter you want, just make sure it is a quality filter such as Purolator, Bosch, Wix, etc.