It measures the position of the crankshaft during it rotation and the engine computer uses that for ignition and fuel timing.
Your speed sensor on a 94 jeep jy is near the crank shaft. I hope i answered your question.
2.0ltr its in distributer
driver side on the back of the motor where is crak sensor on 94 jeep 4.0 grand Cherokee
Need to know what size engine.V6, Vortex 4.3
Where is the crank sensor located on a 94 ranger 4.0 motor
it, sounds like the crank sensor needs to be replaced or throttle body sensor needs to be cleaned.
there are twoCrank sensors on the ford probe GT. One is located in the distributor that control spark and by taking the passenger front wheel off and to the right of the crank shaft pully you will see a one bolt device with three wires, that is your lower crank sensor.
somebody broke or didn't connect the crank sensor
Was not used in that year.
The crank angle sensor is located in the distributor.only in the 94 and 95 Honda accord.
The easiest and most effective way to check a crank sensor is with a diagnostic tester. The diagnostic tester can determine whether the crank sensor is working properly.
The first thing I would try would be cleaning the throttle body with some carb and choke cleaner. When they get really dirty it can cause you to stall at slow speeds. On my 93 there is a Crank Shaft Position sensor. Mine started to melt and the jeep stalled at weired times for a week. If your jeep has a lock up solenoid in your tranny and its stuck on, then you will stall at stops Not sure about a 94, but my 2000 would stall while driving at highway speeds. Dealer replaced the oxygen sensor and it fixed the problem.