The hold button just keeps the tranny in one particular gear. The transmission has other gears, so there is no need to force to use just one. Hope this helps you.
Well the HOLD button is for keeping the car in 2nd and 3rd gear
Whatever it is leaking out of needs replaced/repaired.
You hold the on button and see if it needs to charge
there is a button on the automatic shifter that if pressed makes the hold light come on,the other thing that will make the hold light come on and no matter what you do is the transmission computer. If it needs to be replaced $1000.00 at dealer but $100.oo at junk yard.Make sure you take the one out of car with you to match the computer numbers printed on the top.
First, go in the car. Put the the keys into the hole and turn it. It it in drive. There should be a button on the bottom right. Press and hold that button.
By turning off the hold button
Yes, press the button on the top once for hold and HOLD the button down for the power off slider.
Well, there are many types of assassinations in halo reach for example. You can assassinate by the following. 1.Both players in the air 2.One player in air 3.Both players on ground And the combinations for them are the following. 1.Both players in the air Hold A then Right Button Hold X then Right Button Hold B then Right Button Hold Y then Right Button 2.One player in air Hold A then Right Button Hold X then Right Button Hold B then Right Button Hold Y then Right Button 3.Both players on the ground Hold A then Right Button Hold X then Right Button Hold B then Right Button Hold Y then Right Button I have checked them and they have worked every time I assassinated.
Lots of patience! Hold the reset button, then when it says"to reset hold reset button" let up briefly and hold it! Lots of patience! Hold the reset button, then when it says"to reset hold reset button" let up briefly and hold it!
If you hold down the alt button on the keyboard then you press hold down the ATL button then DRAG THE ?
If you have an automatic lighter connected to the thermostat follow these directions: - Turn the on/off/pilot valve to 'pilot' - Hold the button on top of the controls down completely. This is the thermocoupler button. - While keeping the thermocoupler button pressed down push the automatic lighter button until the pilot light lites. You can see it lit through the viewing glass. - Keep holding the thermocoupler button down for a minute after the pilot light is lit. - If it does not stay lit then your thermocoupler is probably bad and needs to be replaced
The hold button neutralizes all other actions on the psp. If the hold button is turned on nothing you press will do anything. Its useful for transporting your psp and having a game on hold for a bit.