0
What part of a machine should be in position before it is turned on?
Wiki User
∙ 11y ago
The lathe
Sophie Middleton
Add your answer:
Earn +20 pts
Should Fuel pump for ford f 150 2000 ford come on when switch is turned to on position?
For 2 or 3 seconds you will hear the fuel pump run , before starting the engine , when the ignition key is turned to the on / run position
What does the handwheel on a sewing machine do?
It allows you to move the mechanism by hand - slowly to get the machine head into the position you want (say to remove the garment from the machine or to change the needle). ------------------------------------------------------------------------------------------------------------ On all standard sewing machines the handwheel is turned so the top of it comes toward you. It can be turned a small amount in the opposite direction, but turning it any significant amount in the opposite direction will cause damage to the machine.
How can you get a code on an autoscanner without the engine being turned on?
The key has to be turned to the "Run" position, but the engine should not be running. The key has to be on to power up the ECU.
Why does your security light stay on on your 1999 Chevy lumina?
It should turn off when the key is turned to the 'on' position.
Do strawberries get cut up by hand or by machine before they are turned into jam?
They are blended meaning done by a machine to purify the strawberries. Cutting it by hand takes alot of time to get the jam look
What Is lockout tagout program?
It is a written system of how hazardous energy will be controlled before a worker is exposed to it. For instance, when repairing a machine, if the machine were started while a worker was still making repairs, the worker could be killed or injured. Lock out/ tag out would prescribe how to turn off all power, lock it in the off position, tag it (what is turned off, by who, when, why) and release or block all stored energy in the machine.
Can polyurethene be turned on lathe..which tool should be used?
Polyurethane cames in different hardness/durometers. The harder it is, the easier it is to machine it
A baby's usual position just before birth is?
7 month of pregnancy baby turn their body up side down.Head is turned down and legs are up.This is birth position.
In a 2001 ford focus does the check engine light come on when it is started?
When the ignition key is turned to the run position just before starting the vehicle the check engine light should illuminate for a few seconds to prove that the bulb works
At what time should your head lights be turned on?
30 minutes before the sun goes down
How many ballet positions have the feet turned out?
5 positions... the only position that is not turned out is parallel
What are the five steps in ballet?
I think you mean the five positions. In First Position your heels are touching with your toes turned away from your body. In Second Position your feet are shoulder width apart and toes turned away from body. In Third Position your feet are turned outwards but one heel is on the middle inside of the foot In Fourth Position your feet are turned outwards and separated one foot is about 5 in. to 1 ft. in front. In Fifth Position your feet are turned outwards and one heel touches the tip of your toes.
