The body tube of a microscope separates the nose and eyepiece. It supports the eyepiece and allows the optics on the microscope to share a common axis.
it supports the upper part of the microscope where the eyepiece, draw tube , body tube and the objectives is placed .
The body tube of a microscope separates the nose and eyepiece. It supports the eyepiece and allows the optics on the microscope to share a common axis.
A body tube is a tube that supports the eyepiece.
According to Professor Giserey Vonne P. Ocampo, The base supports and holds the whole body of the microscope The arm connects both the base and the Body Tube, supporting the capability of the microscope to stand in balance.
the focus wheel
The "base" supports the microscope. The "arm" holds the eyepiece, bodytube, fine and coarse adjustment knob, nosepiece, and the high and low power objective which connects to the "base. "
The body tube of a microscope separates the nose and eyepiece. It supports the eyepiece and allows the optics on the microscope to share a common axis.
it supports the upper part of the microscope where the eyepiece, draw tube , body tube and the objectives is placed .
The body tube of a microscope separates the nose and eyepiece. It supports the eyepiece and allows the optics on the microscope to share a common axis.
A body tube is a tube that supports the eyepiece.
supports the tube and connects its to the base
Eyepiece Lens: the lens at the top that you look through. They are usually 10X or 15X power.Tube: Connects the eyepiece to the objective lensesArm: Supports the tube and connects it to the baseBase: The bottom of the microscope, used for supportIlluminator: A steady light source (110 volts) used in place of a mirror. If your microscope has a mirror, it is used to reflect light from an external light source up through the bottom of the stage.Stage: The flat platform where you place your slides. Stage clips hold the slides in place. If your microscope has a mechanical stage, you will be able to move the slide around by turning two knobs. One moves it left and right, the other moves it up and down.Revolving Nosepiece or Turret: This is the part that holds two or more objective lenses and can be rotated to easily change power
AnswerWell, the ocular lens is what you look into to see the specimen and the the objective lens is the closest frame to the specimen so they would be connected to the body tube.
Eyepiece Lens: the lens at the top that you look through. They are usually 10X or 15X powerBody Tube: Connects the eyepiece to the objective lensesArm: Supports the tube and connects it to the baseBase: The bottom of the microscope, used for supportIlluminator: A steady light source (110 volts) used in place of a mirror. If your microscope has a mirror, it is used to reflect light from an external light source up through the bottom of the stage.Stage: The flat platform where you place your slides. Stage clips hold the slides in place.Revolving Nosepiece or Turret: This is the part that holds two or more objective lenses and can be rotated to easily change power.Objective Lenses: Usually you will find 3 or 4 objective lenses on a microscope. They almost always consist of 4X, 10X, 40X and 100X powers.Rack Stop: This is an adjustment that determines how close the objective lens can get to the slide. It is set at the factory and keeps students from cranking the high power objective lens down into the slide and breaking things.Condenser Lens: The purpose of the condenser lens is to focus the light onto the specimen. Condenser lenses are most useful at the highest powers (400X and above).Diaphragm or Iris: Many microscopes have a rotating disk under the stage. This diaphragm has different sized holes and is used to vary the intensity and size of the cone of light that is projected upward into the slide.
According to Professor Giserey Vonne P. Ocampo, The base supports and holds the whole body of the microscope The arm connects both the base and the Body Tube, supporting the capability of the microscope to stand in balance.
the arm