Want this question answered?
Corporation piping class 22 or stronger is recommended.
Water would not be a suitable working fluid for a refrigeration cycle, because its freezing temperature and boiling temperature are too high and too distant from each other. In the evaporator and in the condensator, you need the working fluid to change its phase. Also, it would cost a huge compressor to this cycle, because the difference of pressures between the freezing and the boiling points is too high (0ºC: 0.611 kPa; 100ºC: 101.325 kPa)
as clay has more porosity as it absobs water may causes damage to the construction
A basket that strains waste water from going down a waste line
bury it
Which thermometer is most suitable for measuring boiling point of water mercury or alcoholic thermometer
Any material added to water raise the boiling point.
A wooden spoon
Boiling point is a temperature at which the substance starts boiling. Every substance and material can exist in 3 forms: gas, liquid and material. and for example the boiling point of a water is 100 degree celsius.
Because it costs money to clean it and make it suitable for use again. The less water we waste - the less it costs to recycle it !
boiling chlorination ultra-violet radiation ozonation
yes acrylic hold longer on heat water
It depends on the substance. For water the boiling point is 100 degrees celsius
water, carbon dioxide and heat.
The reason it isn't safe to jump in water that is contaminated with nuclear waste material is because it can make you sick or even kill you.
- a thermometer with mercury - a thermometer with thermoresistance
When a cup is filled with boiling water, the heat from the water caused the material of the cup to experience thermal expansion. If the cup is badly made, then different parts of it will expand to different extents and this will create stresses in the material of the cup causing it to crack.