For boiling water waste pipes, materials such as PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) are suitable due to their ability to withstand high temperatures. CPVC, in particular, is better suited for hot water applications as it can handle temperatures up to around 200°F (93°C). Additionally, stainless steel is another option, offering excellent durability and resistance to corrosion. It's important to ensure that any chosen material complies with local building codes and regulations.
Corporation piping class 22 or stronger is recommended.
Water would not be a suitable working fluid for a refrigeration cycle, because its freezing temperature and boiling temperature are too high and too distant from each other. In the evaporator and in the condensator, you need the working fluid to change its phase. Also, it would cost a huge compressor to this cycle, because the difference of pressures between the freezing and the boiling points is too high (0ºC: 0.611 kPa; 100ºC: 101.325 kPa)
Concrete is a suitable material for foundations due to its high compressive strength, durability, and resistance to environmental factors. It can withstand heavy loads and provides stability, making it ideal for supporting structures. Additionally, concrete is relatively inexpensive and can be molded into various shapes, allowing for flexibility in design. Its low permeability also helps protect against water damage and erosion.
as clay has more porosity as it absobs water may causes damage to the construction
A basket that strains waste water from going down a waste line
It is not recommended to put boiling hot water in a rubbermaid water cooler as it may damage the plastic material and affect the integrity of the cooler. It's best to use water at a safe temperature that is suitable for the cooler.
Which thermometer is most suitable for measuring boiling point of water mercury or alcoholic thermometer
No, acrylic is not suitable for use with boiling water as it can soften or distort when exposed to high temperatures. It is recommended to use materials that are heat-resistant like glass or certain types of plastic designed for hot liquids.
A wooden spoon
Boiling point is a temperature at which the substance starts boiling. Every substance and material can exist in 3 forms: gas, liquid and material. and for example the boiling point of a water is 100 degree celsius.
boiling chlorination ultra-violet radiation ozonation
Because it costs money to clean it and make it suitable for use again. The less water we waste - the less it costs to recycle it !
Alcohol thermometers are not suitable for measuring the temperature of boiling water because alcohol has a lower boiling point than water. The alcohol inside the thermometer would evaporate before reaching the temperature of boiling water, therefore providing an inaccurate reading.
The reason it isn't safe to jump in water that is contaminated with nuclear waste material is because it can make you sick or even kill you.
When a cup is filled with boiling water, the heat from the water caused the material of the cup to experience thermal expansion. If the cup is badly made, then different parts of it will expand to different extents and this will create stresses in the material of the cup causing it to crack.
Yes, the sigmoid colon does reabsorb water from the remaining waste material that passes through it. This reabsorption helps to consolidate the waste material into a solid form before it is excreted from the body.
Solar convection currents, where heated material rises and cooler material sinks, share similarities with the movement of water boiling in a pot. Just like in a pot of boiling water, the convective motion in the Sun plays a crucial role in distributing heat and energy throughout the solar interior.