0
What else can I help you with?
What do AMP connectors do?
AMP connectors are used for power cords and sockets. They will help your power cord work.
Can a 13 amp power cord replace a 15 amp power cord?
Yes, but don't try to put 15 amps through it! You might need to change your plug too!
Alpine CD player model 7914 there are 8 wires in the top of the plug power wires no speaker wires if you remove the plug there are pins is it missing all the speaker wires in the plug?
the alpine 7914 is pre-amp only you need a amp
Can two guitars share one amp?
Yeah but the amp has to have 2 active inputs and there are few amps that have 2 active inputs You need a 6. 5mm cable splitter. . . These have two 6. 5mm female input sockets (same as guitar amp) and one male output. This means that you can plug two guitars into one amp!!!
Can you plug a 20 amp and 220 v into a 16 amp and 220 v power socket?
Yes, as long as the plug and receptacle match in pin configurations, it can be done.
Can you plug a 16 amp and 220 v into a 20 amp and 220 v power socket?
Yes, as long as the plug and receptacle match in pin configurations, it can be done.
What type of plug is required for a 30 amp generator?
A 30 amp generator typically requires a NEMA L14-30 plug for proper connection to power sources.
What amp plug should a vacuum have?
A vacuum typically requires an amp plug with a rating of 10-12 amps for standard household use. Be sure to check the manufacturer's specifications for the specific power requirements of your vacuum cleaner.
What's the best way to install a subwoofer box and amp in an Oldsmobile Alero?
If you have an after-market head unit, it will be easier. You need RCA audio cables, speaker wire and some pretty thick wire for you power connection. First, you should take out the stereo and plug in your RCA cables (red to red and white to white)and then plug those into your amp as well. Then you need to find the wire marked Acc. on the wires in the back of your stereo. connect a pretty long wire to this wire. This will be plugged into your remote on your amp. The next thing you need to do is plug your thick cable into your positive side of your car battery and plug the other side into your power on your amp. The last thing you need to do for your amp is put a wire from the ground on your amp to a screw in your car that is unpainted and connected to the chassis. If everything else is hooked up correctly, you might need to play with the ground wire as this is usually the problem area. Then plug speakers into the appropriate places on the amp and box (Pos. to pos. and neg. to neg.) Make sure the amp turns off when your car does or you could drain your battery.
Can you plug a bass into a guitar amp?
Yes, you can plug a bass into a guitar amp, but it may not produce the best sound quality due to differences in the instruments' frequencies and power handling capabilities.
Were do you plug your subs into?
well you plug your sub into your amp you do have an amp write
Does a 30 amp camper plug have 220 volts?
No, a 30 amp shore power plug is strictly 120volts. A 50 amp shore power plug is technically a 220v system, however the camper uses the two 120v wires in the cord separately. There are no 220v appliances in RV's today.
