0
What else can I help you with?
What is the procedure to replace the printer drum for a Brother brand printer?
Make sure the printer is turned on and the drum LED is blinking. Open the front cover. Slowly pull the drum unit and toner cartridge assembly out of the machine. Push down the green lock and take the cartridge out of the drum unit.
What types of accessories are available for the Brother HL 5250DN?
The accessories available for the Brother HL 5250DN Printer include high yield ink cartridges such as the TN580 cartridge and the DR3100 Drum Unit, all available from Printer Accessory websites.
How do you fix a toner error on a brother printer?
Check the Toner Cartridge Turn Off the Printer: Switch off the printer and unplug it from the power source to ensure safety. Open the Front Cover: Access the toner cartridge by opening the front cover of the printer. Remove the Toner Cartridge: Gently pull out the toner cartridge. Handle it carefully to avoid toner spillage. Inspect the Cartridge: Look for any signs of damage or leaks. Ensure that the cartridge is not empty and that it is correctly installed. Reinstall or Replace the Toner Cartridge Reinstall: If the toner cartridge appears to be in good condition, reinstall it carefully. Make sure it clicks into place properly. Replace: If the cartridge seems empty or damaged, replace it with a new, compatible toner cartridge. Make sure the replacement is the correct model for your Brother printer. Check the Drum Unit Remove the Drum Unit: In printers with a separate drum unit, carefully remove it by pulling it out after removing the toner cartridge. Inspect the Drum: Check the drum unit for any visible damage or toner buildup. Clean the drum gently with a soft, dry cloth if necessary. Reinstall: Place the drum unit back into the printer and reinsert the toner cartridge. Reset the Toner Power Cycle: Turn the printer off, wait a few seconds, and turn it back on. This can sometimes clear minor errors. Reset Toner Counter: For Many Brother Models: Open the front cover, then press the “Clear/Back” button or “Stop/Exit” button. Follow the instructions on the display to reset the toner counter. The exact method can vary by model, so check your printer’s manual for specific instructions. Check for Firmware Updates Visit Brother’s Website: Go to Brother’s official website to check for firmware updates for your printer model. Updating the firmware can resolve some errors related to toner. Clean the Printer Dust and Debris: Use a soft, dry cloth to gently clean any dust or debris inside the printer. Be cautious around sensitive components like the drum and toner. Consult the Printer Manual Refer to the Manual: Check the user manual for specific troubleshooting steps related to toner errors for your model. The manual often contains model-specific guidance. Contact Brother Support Customer Support: If the error persists after trying these steps, contact Brother’s customer support for assistance. They can provide further troubleshooting steps or advise on repairs if needed. By following these steps, you should be able to address most toner error issues with your Brother printer. If you encounter a persistent problem, it may indicate a more serious issue requiring professional repair.
What type of cartridge would one use in a Brother copier?
The Brother DCP-7060D Laser Multi-Funtion Copier uses a toner cartridge and drum unit cartridge. The Brother TN-420 Black Toner Cartridge is available for 41.79 and the Brother DR-420 Drum Cartridge is 87.79 from the Staples website.
On my printer it said dust on drum what is a drum that's on your printer?
Evidently you have a page printing Laser Printer rather than an Inkjet or matrix style. That technology uses a drum. This is similar in concept to a copier, and contains a Drum. It may be an integral part of the toner cartridge.
How much does a Brother DR200 drum cartridge cost?
You can purchase a Brother DR200 drum cartridge for «£10.00 on Amazon. This is the cheapest price available. However prices vary considerably and you can expect to pay up to «£170.00 rrp.
Do you need both a drum cartridge and a toner cartridge?
Almost all of HP and Canon's laserjet toner cartridges are made up of a toner half and a drum half that are connected by either 2 pins or a end cap with screws. But if you are referring to a cartridge that uses separate toner and drum units that need to be combined in order to work in your printer, there are several printer manufacturers that have those style of printers. Brother printers are famous for this, as well as many Xerox, Sharp and few others. For example, the Brother HL series printers all use both a TN series cartridge and a DR series cartridge. These need to be connected together first, then they can be inserted into the printer to be used as a single cartridge. With the Xerox X series and the Sharp AL series it is slightly different step to combine the two separate units. In these style of printers the drum unit is normally inserted into the printer first then the toner unit is combined with the drum by sliding it into the printer on top of the drum unit till it locks in place.
How Can I Fix the “REPLACE DRUM” Error Message on My Brother Printer?
The "REPLACE DRUM" error message on a Brother printer typically indicates that the drum unit needs to be replaced or reset. Follow these steps to resolve the issue: Check if the Drum Unit Needs Replacement Inspect the Drum Unit: Open the printer's front cover and remove the drum unit and toner cartridge assembly. Check for signs of wear, such as streaks or damage. Purchase a New Drum Unit: If the drum is worn out, you will need to buy a compatible replacement drum for your specific Brother printer model. Reset the Drum Counter (if you've replaced it) If you've already replaced the drum unit or are sure it's still functional, you may need to reset the drum counter. The process varies slightly depending on the printer model. General Steps for Resetting: Open the front cover of the printer. Press and hold the “OK” or “Go” button for 3-5 seconds (depending on your model) until the "Drum Unit" or "Reset Drum Counter" message appears. Press the “OK” button again to confirm. Close the front cover. Clean the Drum Unit If the drum is still usable but causing issues: Remove the drum unit and gently wipe it with a lint-free cloth. Avoid touching the drum's surface as it is sensitive to light and fingerprints. Read more,,t.ly/0mnVy
How does someone change the drum on a Brother DCP-7020 printer?
Remove the drum, leave the front door open on the machine, press the options button, and you will be prompted with "New Drum?" and then press yes and "Accepted" will appear. Close the drum door.
Which component normally included in a laser printer's toner cartridge?
Photo Sensitive Drum, cleaning blade, and primary corona wire
Where can one purchase a drum unit for a Brother DR 200 printer?
One can find and purchase a drum unit for a Brother DR 200 printer online at websites such as Amazon or eBay. One can also purchase it at stores such as Staples and Best Buy.
Besides filling a Laser Printer cartridge with toner how long does an image drum last and how do you check it out?
Most laser printer drums, whether included in the toner cartridge or installed in the printer as a separate unit, will have a life of no fewer than 15,000 pages but some can be 50,000 or even 100,000 pages. It all depends on the service it is designed to expect. Most of the smaller, home-user type of laser printer will have drums that are less robust than those used in office environments. However, if the drum is part of the toner cartridge and therefore gets replaced each time you put in a new cartridge, the life of the drum is of little concern. It should last much longer than the amount of toner that is in the cartridge. Exceptions would be if the drum surface is damaged in some fashion. For example, if someone tries to print labels inside a laser printer (something that is not recommended by any manufacturer!), some of the adhesive of the labels (or sometimes an entire label itself) will adhere to the drum and cause print quality issues such as certain repeating patterns, lines down the page, etc. In that case, the only thing to do is to replace the drum (which hopefully in that case is within the toner cartridge as that is most frequently cheaper to replace than a separate image drum).
