0
What else can I help you with?
What type of cartridge would one use in a Brother copier?
The Brother DCP-7060D Laser Multi-Funtion Copier uses a toner cartridge and drum unit cartridge. The Brother TN-420 Black Toner Cartridge is available for 41.79 and the Brother DR-420 Drum Cartridge is 87.79 from the Staples website.
What printer models can use the Brother DR 510 drum cartridge?
The Brother DR-510 drum cartridge is compatible with the following printers: the Brother All-in-One Machines, the Brother Copy Machines and the Brother Laser Printers.
What is the procedure to replace the printer drum for a Brother brand printer?
Make sure the printer is turned on and the drum LED is blinking. Open the front cover. Slowly pull the drum unit and toner cartridge assembly out of the machine. Push down the green lock and take the cartridge out of the drum unit.
How much might a replacement Brother drum unit cost?
A replacement Brother drum unit can cost anywhere from 30 dollars to 100 dollars. They can be bought either online or at stores that sell the drum unit.
What is the difference between a drum and a cartridge?
A drum is for laser printers, while a cartridge is more for inkjets. They're mutually exclusive.
What types of accessories are available for the Brother HL 5250DN?
The accessories available for the Brother HL 5250DN Printer include high yield ink cartridges such as the TN580 cartridge and the DR3100 Drum Unit, all available from Printer Accessory websites.
How do you refill brother HL-2140 toner?
First you need to buy a replacement Brother Tn330 or TN360 black toner cartridge. Then follow these steps1. Open the printer's front door2. Pull out the drum and toner assembly3. Push down on the green lever to remove the toner from the drum.4. Insert new toner cartridge and replace the assembly.For detailed pictures see the extertnal link to the Brother HL-2140 user manual (further down this page, listed under External Links.)
How do you fix a toner error on a brother printer?
Check the Toner Cartridge Turn Off the Printer: Switch off the printer and unplug it from the power source to ensure safety. Open the Front Cover: Access the toner cartridge by opening the front cover of the printer. Remove the Toner Cartridge: Gently pull out the toner cartridge. Handle it carefully to avoid toner spillage. Inspect the Cartridge: Look for any signs of damage or leaks. Ensure that the cartridge is not empty and that it is correctly installed. Reinstall or Replace the Toner Cartridge Reinstall: If the toner cartridge appears to be in good condition, reinstall it carefully. Make sure it clicks into place properly. Replace: If the cartridge seems empty or damaged, replace it with a new, compatible toner cartridge. Make sure the replacement is the correct model for your Brother printer. Check the Drum Unit Remove the Drum Unit: In printers with a separate drum unit, carefully remove it by pulling it out after removing the toner cartridge. Inspect the Drum: Check the drum unit for any visible damage or toner buildup. Clean the drum gently with a soft, dry cloth if necessary. Reinstall: Place the drum unit back into the printer and reinsert the toner cartridge. Reset the Toner Power Cycle: Turn the printer off, wait a few seconds, and turn it back on. This can sometimes clear minor errors. Reset Toner Counter: For Many Brother Models: Open the front cover, then press the “Clear/Back” button or “Stop/Exit” button. Follow the instructions on the display to reset the toner counter. The exact method can vary by model, so check your printer’s manual for specific instructions. Check for Firmware Updates Visit Brother’s Website: Go to Brother’s official website to check for firmware updates for your printer model. Updating the firmware can resolve some errors related to toner. Clean the Printer Dust and Debris: Use a soft, dry cloth to gently clean any dust or debris inside the printer. Be cautious around sensitive components like the drum and toner. Consult the Printer Manual Refer to the Manual: Check the user manual for specific troubleshooting steps related to toner errors for your model. The manual often contains model-specific guidance. Contact Brother Support Customer Support: If the error persists after trying these steps, contact Brother’s customer support for assistance. They can provide further troubleshooting steps or advise on repairs if needed. By following these steps, you should be able to address most toner error issues with your Brother printer. If you encounter a persistent problem, it may indicate a more serious issue requiring professional repair.
What causes a ghost image on a printout?
it is bcoz of there is a problem with the developing drum
Where can one purchase a q3964 imaging drum?
There are a number of stores that sell a HP Q3964 imaging drum. These include Quality Cartridge, Cartridge Save, HP Toner Cartridges, Dabs and the auction website eBay.
How do I get rid of wide black line down middle of copies?
This happens on LASER printers when the drum is damaged. On modern LASER printers the drum is part of the toner cartridge. Replacing the black toner cartridge should solve the problem.
Do you need both a drum cartridge and a toner cartridge?
Almost all of HP and Canon's laserjet toner cartridges are made up of a toner half and a drum half that are connected by either 2 pins or a end cap with screws. But if you are referring to a cartridge that uses separate toner and drum units that need to be combined in order to work in your printer, there are several printer manufacturers that have those style of printers. Brother printers are famous for this, as well as many Xerox, Sharp and few others. For example, the Brother HL series printers all use both a TN series cartridge and a DR series cartridge. These need to be connected together first, then they can be inserted into the printer to be used as a single cartridge. With the Xerox X series and the Sharp AL series it is slightly different step to combine the two separate units. In these style of printers the drum unit is normally inserted into the printer first then the toner unit is combined with the drum by sliding it into the printer on top of the drum unit till it locks in place.
